Document
 
 UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-K
x
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended September 30, 2016
OR
o
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
Commission file number: 001-32892
MUELLER WATER PRODUCTS, INC.
(Exact Name of Registrant as Specified in Its Charter)
Delaware
 
20-3547095
(State or Other Jurisdiction of Incorporation or Organization)
 
(I.R.S. Employer Identification Number)
1200 Abernathy Road N.E.
Suite 1200
Atlanta, GA 30328
(Address of Principal Executive Offices)
Registrant’s telephone number: (770) 206-4200
Securities registered pursuant to Section 12(b) of the Act:
Title of Each Class
 
Name of Each Exchange on Which Registered
Common Stock, par value $0.01
 
New York Stock Exchange
Securities registered pursuant to Section 12(g) of the Act: None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. x Yes o No
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. o Yes x No
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. x Yes o No
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulations S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files.) x Yes o No
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.505 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  o
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one): x Large accelerated filer     o Accelerated filer      o Non-accelerated filer o Smaller reporting company
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).   o Yes x No
There were 161,732,282 shares of common stock of the registrant outstanding at November 16, 2016. At March 31, 2016, the aggregate market value of the voting and non-voting common stock held by non-affiliates (assuming only for purposes of this computation that directors and executive officers may be affiliates) was $1,575.9 million based on the closing price per share as reported on the New York Stock Exchange.
DOCUMENTS INCORPORATED BY REFERENCE
Applicable portions of the Proxy Statement for the upcoming 2017 Annual Meeting of Stockholders of the Company are incorporated by reference into Part III of this Form 10-K.
 



Introductory Note
In this Annual Report on Form 10-K (this “annual report”), (1) the “Company,” “we,” “us” or “our” refer to Mueller Water Products, Inc. and its subsidiaries, including Mueller Co., Anvil and Mueller Technologies; (2) “Mueller Co.” refers to our Mueller Co. segment; (3) “Anvil” refers to our Anvil segment; (4) “Mueller Technologies” refers to our Mueller Technologies segment and (5) “U.S. Pipe” refers to our former U.S. Pipe segment, which we sold on April 1, 2012. With regard to the Company’s segments, “we,” “us” or “our” may also refer to the segment being discussed.
Certain of the titles and logos of our products referenced in this annual report are part of our intellectual property. Each trade name, trademark or service mark of any other company appearing in this annual report is the property of its owner.
Unless the context indicates otherwise, whenever we refer in this annual report to a particular year, we mean our fiscal year ended or ending September 30 in that particular calendar year. We manage our business and report operations through three business segments: Mueller Co., Anvil and Mueller Technologies, based largely on the products sold and the customers served.
Industry and Market Data
In this annual report, we rely on and refer to information and statistics from third-party sources regarding economic conditions and trends, the demand for our water infrastructure, flow control and piping component system products and services and the competitive conditions we face in serving our customers and end users. We believe these sources of information and statistics are reasonably accurate, but we have not independently verified them.
Most of our primary competitors are not publicly traded companies. Only limited current public information is available with respect to the size of our end markets and our relative competitive position. Our statements in this annual report about our end markets and competitive positions are based on our beliefs, studies and judgments concerning industry trends.
Forward-Looking Statements
This annual report contains certain statements that may be deemed “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. All statements that address activities, events or developments that we intend, expect, plan, project, believe or anticipate will or may occur in the future are forward-looking statements. Examples of forward-looking statements include, but are not limited to, statements we make regarding our business strategy, capital allocation plans and expectations for net sales and operating income margins in 2017 and the outlook for general economic conditions, spending by municipalities and the residential and non-residential construction markets and the impacts of these factors on our business and our expected financial performance in 2017. Forward-looking statements are based on certain assumptions and assessments made by us in light of our experience and perception of historical trends, current conditions and expected future developments. Actual results and the timing of events may differ materially from those contemplated by the forward-looking statements due to a number of factors, including regional, national or global political, economic, business, competitive, market and regulatory conditions and the other factors described under the section entitled “RISK FACTORS” in Item 1A of Part I of this annual report.
Undue reliance should not be placed on any forward-looking statements. We do not have any intention or obligation to update forward-looking statements, except as required by law.


Table of Contents
Index to Financial Statements


TABLE OF CONTENTS
 
 
Page
 
 
Item 1.
 
 
 
 
 
 
 
 
 
 
 
 
Regulatory and Environmental Matters
 
 
 
Securities Exchange Act Reports
 
 
 
Item 1A.
Item 2.
Item 3.
 
 
 
 
 
Item 5.
 
 
 
 
Item 6.
Item 7.
 
 
 
 
 
 
 
 
Seasonality
 
Item 7A.
Item 8.
Item 9A.
 
 
 
 
 
Item 10*
Item 11*
Item 12*
Item 13*
Item 14*
 
 
 
 
 
Item 15
 
 
 
*
All or a portion of the referenced section is incorporated by reference from our definitive proxy statement that will be issued in connection with the upcoming 2017 Annual Meeting of Stockholders.


Table of Contents
Index to Financial Statements


PART I
Item 1.
BUSINESS
Our Company
Mueller Water Products, Inc. is a Delaware corporation that was incorporated on September 22, 2005 under the name Mueller Holding Company, Inc. It is the surviving corporation of the merger of Mueller Water Products, LLC and Mueller Water Products Co-Issuer, Inc. with and into Mueller Holding Company, Inc. on February 2, 2006, when we changed our name to Mueller Water Products, Inc. On June 1, 2006, we completed an initial public offering of 28,750,000 shares of Series A common stock.
On December 14, 2006, Walter Industries, Inc., our parent company at that time,distributed to its shareholders 85,844,920 shares of our Series B common stock (the “Spin-off”). Walter Industries subsequently changed its name to Walter Energy, Inc. (“Walter Energy”). On January 28, 2009, each share of Series B common stock was converted into one share of Series A common stock and the Series A designation was discontinued.
On September 23, 2009, we completed a public offering of 37,122,000 shares of common stock.
On April 1, 2012, we sold U.S. Pipe.
We are a leading manufacturer and marketer of products and services used in the transmission, distribution and measurement of water in North America. Our products and services are used by municipalities and the residential and non-residential construction industries. Certain of our products have leading positions due to their strong brand recognition and reputation for quality, service and innovation. We believe we have one of the largest installed bases of iron gate valves and fire hydrants in the United States. Our iron gate valve or fire hydrant products are specified for use in the largest 100 metropolitan areas in the United States. Our large installed base, broad product range and well-known brands have led to long-standing relationships with the key distributors and end users of our products. Our consolidated net sales were $1,138.9 million in 2016.
Segment sales, operating results and additional financial data and commentary are provided in the Segment Analysis section in Part II, Item 7. “MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS” and in Note 15. of the Notes to Consolidated Financial Statements in Part II, Item 8. “FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA” of this annual report.
Mueller Co.
Mueller Co. manufactures valves for water and gas systems, including iron gate, butterfly, tapping, check, knife, plug and ball valves, as well as dry-barrel and wet-barrel fire hydrants and a broad line of pipe repair products, such as clamps and couplings used to repair leaks. Mueller Co.’s net sales were $715.7 million in 2016. Sales of Mueller Co. products are driven principally by spending on water and wastewater infrastructure upgrade, repair and replacement, and by construction of new water and wastewater infrastructure, which is typically associated with construction of new residential communities. Mueller Co. sells its products primarily through waterworks distributors. We estimate approximately 60% of Mueller Co.’s 2016 net sales were for infrastructure upgrade, repair and replacement.
Anvil  
Anvil manufactures and sources a broad range of products, including a variety of fittings, couplings, hangers, valves and related products for use in non-residential construction (including HVAC and fire protection applications), industrial, power and oil & gas end markets. Anvil’s net sales were $338.3 million in 2016. Anvil sells its products primarily through distributors that resell to a wide variety of end users. Anvil services these distributors primarily through its distribution centers.
Mueller Technologies
Mueller Technologies companies offer residential and commercial water metering products and systems and water leak detection and pipe condition assessment products and services. Mueller Technologies’ net sales were $84.9 million in 2016. Mueller Technologies is comprised of the Mueller Systems and Echologics businesses. Mueller Systems sells water metering systems, products and services directly to municipalities and to waterworks distributors. Echologics sells water leak detection and pipe condition assessment products and services primarily to end users.

1

Table of Contents
Index to Financial Statements


Business Strategy
Our business strategy is to capitalize on the large, attractive and growing water infrastructure markets. Key elements of this strategy are as follows:
Continue to maintain our leadership positions with our customers and end users
We plan to maintain our leadership positions with our customers and end users by leveraging our brands and large installed base; our valve or fire hydrant products’ specification in the 100 largest metropolitan areas in the United States; our established and extensive distribution channels; and our broad range of leading water infrastructure, flow control and piping component system products, as well as by developing and introducing additional products and services.
Continue to enhance operational excellence
We will continue to pursue superior product engineering, design and manufacturing by investing in technologically advanced manufacturing processes. We will continue to expand the use of Lean manufacturing and Six Sigma business improvement methodologies where appropriate to safely capture higher levels of quality, service and operational efficiency. We will also continue to evaluate outsourcing or insourcing certain products wherever doing so will lower our costs while maintaining high quality and service levels.
Continue to seek to develop, acquire and invest in businesses and technologies that expand our existing portfolio of businesses or that allow us to enter new markets
We will continue to evaluate the development and acquisition of strategic businesses, technologies and product lines that have the potential to strengthen our competitive positions, enhance or expand our existing product and service offerings, expand our technological capabilities, provide synergistic opportunities or that allow us to enter new markets.  As part of this strategy, we may pursue international opportunities, including acquisitions, joint ventures and partnerships, that allow us to expand product or service offerings or to enter new markets. We will also continue to invest, through acquisition or internal development, in technologies, intellectual capital and product development to enhance or expand our existing product and service offerings.
Description of Products and Services
We offer a broad line of water infrastructure, flow control and piping component system products and services primarily in the United States and Canada. Mueller Co. sells water and gas valves and fire hydrants. Anvil sells a broad range of pipe fittings, couplings and hangers. Mueller Technologies companies sell water metering products and systems and leak detection and pipe condition assessment products and services. Our products are designed, manufactured and tested in compliance with industry standards, where applicable.
Mueller Co.
Mueller Co.’s water distribution products are manufactured to meet or exceed American Water Works Association (“AWWA”) Standards and, where applicable, certified to NSF/ANSI Standard 61 for potable water conveyance. In addition, Underwriters Laboratory (“UL”) and FM Approvals (“FM”) have approved many of these products. These products are typically specified by a water utility for use in its system.
Water and Gas Valves and Related Products.  Mueller Co. manufactures valves for water and gas systems, including iron gate, butterfly, tapping, check, knife, plug and ball valves, and sells these products under a variety of brand names, including Mueller and U.S. Pipe Valve and Hydrant. Water and gas valves and related products, generally made of iron or brass, accounted for $504.8 million, $495.7 million and $474.2 million of our gross sales in 2016, 2015 and 2014, respectively. These valve products are used to control transmission of potable water, non-potable water or gas. Water valve products typically range in size from ¾ inch to 36 inches in diameter. Mueller Co. also manufactures significantly larger valves as custom order work through its Henry Pratt business unit. Most of these valves are used in water transmission or distribution, water treatment facilities or industrial applications.
Mueller Co. also produces small valves, meter bars and line stopper fittings for use in gas systems, as well as machines and tools for tapping, drilling, extracting, installing and stopping-off, which are designed to work with its water and gas fittings and valves as an integrated system.

2

Table of Contents
Index to Financial Statements


Fire Hydrants.  Mueller Co. manufactures dry-barrel and wet-barrel fire hydrants. Sales of fire hydrants and fire hydrant parts accounted for $184.9 million, $177.4 million and $175.0 million of our gross sales in 2016, 2015 and 2014, respectively. Mueller Co. sells fire hydrants for new water infrastructure development, fire protection systems and water infrastructure repair and replacement projects.
These fire hydrants consist of an upper barrel and nozzle section and a lower barrel and valve section that connects to a water main. In dry-barrel hydrants, the valve connecting the barrel of the hydrant to the water main is located below ground at or below the frost line, which keeps the upper barrel dry. Mueller Co. sells dry-barrel fire hydrants under the Mueller and U.S. Pipe Valve and Hydrant brand names in the United States and the Canada Valve brand name in Canada. Mueller Co. also makes wet-barrel hydrants, where the valves are located in the hydrant nozzles and the barrel contains water at all times. Wet-barrel hydrants are made for warm weather climates, such as in California and Hawaii, and are sold under the Jones brand name.
Most municipalities have approved a limited number of fire hydrant brands for installation within their systems due to their desire to use the same tools and operating instructions across their systems and to minimize inventories of spare parts. We believe Mueller Co.’s large installed base of fire hydrants throughout the United States and Canada, reputation for superior quality and performance and incumbent specification positions have contributed to the leading market positions of its fire hydrants. This large installed base also leads to recurring sales of replacement hydrants and hydrant parts.
Other Products and Services. Mueller Co. also sells pipe repair products, such as clamps and couplings used to repair leaks, under the Mueller and Jones brand names.
Anvil
Anvil products include a variety of fittings, couplings, hangers, valves and related piping component system products for use in non-residential construction (including HVAC and fire protection applications), industrial, power and oil & gas end markets. Anvil’s net sales were $338.3 million, $371.1 million and $401.4 million in 2016, 2015 and 2014, respectively, of which $96.8 million, $98.0 million and $98.3 million, respectively, were of products manufactured by third parties. The oil & gas end markets accounted for approximately 5%, 10% and 20% of Anvil’s gross sales in 2016, 2015 and 2014, respectively. Anvil’s sales into the oil & gas markets decreased significantly during 2015 and 2016 as a result of a decline in oil & gas drilling activity.
The majority of Anvil’s products are not specified by an architect or an engineer, but are required to be manufactured to industry specifications, which may include material composition, tensile strength and various other requirements. Many products carry the UL, FM or other approval rating.
Fittings and Couplings. Pipe fittings and couplings join pieces of pipe together. Anvil manufactures five primary categories of pipe fittings and couplings:
Cast Iron Fittings. Cast iron is an economical threaded-fitting material and is the standard used in the United States for low pressure applications, such as sprinkler systems and other fire protection systems. We believe the substantial majority of Anvil’s cast iron products are used in the fire protection industry, with the remainder used in steam and other HVAC applications.
Malleable Iron Fittings and Unions.  Malleable iron is cast iron that is heat-treated to make it stronger, allowing a thinner wall and a lighter product. Threaded malleable iron products are used primarily to join pipe in oil & gas and industrial applications.
Grooved Fittings, Couplings and Valves. Grooved ductile iron products, which use a threadless pipe-joining method that does not require welding, are used in all of Anvil’s end markets.
Threaded Steel Pipe Couplings. Threaded steel pipe couplings are used by plumbing and electrical end users to join pipe and conduit and by pipe mills as threaded-end protectors.
Nipples.  Pipe nipples are used to expand or compress the flow between pipes of different diameters. Anvil’s steel pipe nipple product line is a complementary product offering that is packaged with cast iron fittings for fire protection products, malleable iron fittings for industrial applications and its forged steel products for oil & gas and chemical applications. Pipe nipples are also general plumbing items.
Hangers. Anvil manufactures a broad array of pipe hangers and supports.  Standard pipe hangers and supports are used in fire protection sprinkler systems and HVAC applications where the objective is to provide rigid support from the building structure. Special order, or engineered, pipe supports are used in power and chemical plants to support piping systems that must withstand thermal, dynamic or seismic movement.

3

Table of Contents
Index to Financial Statements


Other Products.  Anvil distributes other products, including forged steel pipe fittings, hammer unions, bull plugs and swage nipples used to connect pipe in oil & gas applications. Anvil also sells pipe fabrication machines directly to customers in the fire protection industry.
Mueller Technologies
Mueller Technologies is comprised of companies that provide innovative solutions, products and services that actively diagnose, monitor and control the delivery of water.
Water Metering Products and Systems. Mueller Systems manufactures and sources a variety of water technology products under the Mueller Systems and Hersey brand names that are designed to help water providers accurately measure and control water usage. Mueller Systems offers a complete line of residential, fire line and commercial metering solutions. Residential and commercial water meters are generally classified as either manually read meters or remotely read meters via radio technology. A manually read meter consists of a water meter and a register that gives a visual meter reading display. Meters equipped with radio transmitters (endpoints) use encoder registers to convert the measurement data from the meter (mechanical or static) into an encrypted digital format which is then transmitted via radio frequency to a receiver that collects and formats the data appropriately for water utility billing systems. These remotely read, or mobile, systems are either automatic meter reading (“AMR”) systems, where equipment for meter reading purposes, including a radio receiver, computer and reading software, collects the data from utilities’ meters; or fixed network advanced metering infrastructure (“AMI”) systems, where data is gathered utilizing a network of permanent data collectors or gateway receivers that are always active or listening for the radio transmission from the utilities’ meters. AMI systems eliminate the need for utility personnel to travel through service territories to collect meter reading data. These systems provide the utilities with more frequent and diverse data at specified intervals from the utilities’ meters. Mueller Systems sells both AMR and AMI systems and related products. Mueller Systems’ remote disconnect water meter enables the water flow to be stopped and started remotely via handheld devices or from a central operating facility.
Sales of water metering products and systems accounted for 83%, 88% and 90% of Mueller Technologies’ net sales in 2016, 2015 and 2014, respectively.
Water Leak Detection and Pipe Condition Assessment Products and Services. Echologics develops technologies and offers products and services under the Echologics brand name that can non-invasively (without disrupting service or introducing a foreign object into the water system) detect underground leaks and assess the condition of water mains comprised of a variety of materials.  Echologics leverages its proprietary acoustic technology to offer leak detection and condition assessment surveys. In 2014, Echologics began offering a fixed leak detection service that allows customers to continuously monitor and detect leaks on water transmission mains. We believe Echologics’ ability to offer accurate leak detection and pipe condition assessment services non-invasively is a key competitive advantage.
Manufacturing
See “Item 2. PROPERTIES” for a description of our principal manufacturing facilities.
We will continue to expand the use of Lean manufacturing and Six Sigma business improvement methodologies where appropriate to safely capture higher levels of quality, service and operational efficiency.
Mueller Co.
Mueller Co. operates nine manufacturing facilities located in the United States and China. These manufacturing operations include foundry, machining, fabrication, assembly, testing and painting operations. Not all facilities perform each of these operations. Mueller Co.’s existing manufacturing capacity is sufficient for anticipated near-term requirements and Mueller Co. has no current plans to expand capacity.
Mueller Co. foundries use lost foam and green sand casting techniques. Mueller Co. uses the lost foam technique for fire hydrant production in its Albertville, Alabama facility and for iron gate valve production in its Chattanooga, Tennessee facility. The lost foam technique has several advantages over the green sand technique for high-volume products, including a reduction in the number of manual finishing operations, lower scrap levels and the ability to reuse some of the materials.

4

Table of Contents
Index to Financial Statements


Anvil
Anvil currently operates nine manufacturing facilities located in the United States.  Anvil’s manufacturing operations include foundry, heat treating, machining, fabricating, assembling, testing and painting operations.  Not all facilities perform each of these operations. These foundry operations employ automated vertical and horizontal green sand molding equipment. Anvil’s products are made in a high-volume production environment, with extensive use of high-speed computer controlled machines and other automated equipment.
Mueller Technologies
Mueller Systems operates one manufacturing facility in the United States and contracts with a manufacturing facility in Mexico. Mueller Systems designs, manufactures and assembles water metering products in Cleveland, North Carolina and designs and supports AMI systems in Middleborough, Massachusetts. Echologics designs leak detection and condition assessment products in Toronto, Ontario.
Purchased Components and Raw Materials
Our products are made using various purchased components and several basic raw materials, including scrap steel, sand, resin, brass ingot and steel pipe. Purchased parts and raw materials represented 44% and 10%, respectively, of cost of sales in 2016.
Patents, Licenses and Trademarks
We have active patents relating to the design of our products and trademarks for our brands and products. We have filed and continue to file, when appropriate, patent applications used in connection with our business and products. Many of the patents for technology underlying the majority of our products have been in the public domain for many years, and we do not believe third-party patents individually or in the aggregate are material to our business. However, we consider the pool of proprietary information, consisting of expertise and trade secrets relating to the design, manufacture and operation of our products to be particularly important and valuable. We generally own the rights to the products that we manufacture and sell, and we are not dependent in any material way upon any license or franchise to operate. See “Item 1A. RISK FACTORS-Any inability to protect our intellectual property or our failure to effectively defend against intellectual property infringement claims could adversely affect our competitive position.”
The table below highlights selected brand names by segment.
Mueller Co.
 
Anvil
 
Mueller Technologies
Canada Valve™
 
Anvil®
 
Echologics®
Centurion®
 
Anvil-Strut®
 
Echoshore®
Hydro Gate®
 
Beck®
 
ePulse®
Hydro-Guard®
 
Catawissa™
 
Hersey™
Jones®
 
Gruvlok®
 
LeakFinderRT®
Milliken™
 
J.B. Smith™
 
LeakFinderST™
Mueller®
 
Merit™
 
LeakListener®
Pratt®
 
SPF®
 
LeakTuner®
U.S. Pipe Valve and Hydrant™
 
 
 
Mi.Echo®
 
 
 
 
Mi.Data®
 
 
 
 
Mi.Hydrant™
 
 
 
 
Mi.Net®
 
 
 
 
Mueller Systems®
Seasonality
See “Item 1A. RISK FACTORS-Seasonal demand for certain of our products and services may adversely affect our financial results.” and “Item 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS-Seasonality.”

5

Table of Contents
Index to Financial Statements


Sales, Marketing and Distribution
We sell primarily to distributors. Our distributor relationships are generally non-exclusive, but we attempt to align ourselves with key distributors in the principal markets we serve. We believe Mueller is the most recognized brand in the U.S. water infrastructure industry.
Mueller Co.
Mueller Co. sells its products primarily through waterworks distributors to a wide variety of end user customers, including municipalities, water and wastewater utilities, gas utilities, and fire protection and construction contractors. Sales of our products are heavily influenced by the specifications for the underlying projects. Approximately 8%, 9% and 12% of Mueller Co.’s net sales were to Canadian customers in 2016, 2015 and 2014, respectively.
At September 30, 2016, Mueller Co. had 90 sales representatives in the field and 91 inside marketing and sales professionals, as well as 113 independent manufacturer’s representatives. In addition to calling on distributors, these representatives call on municipalities, water companies and other end users to ensure the products specified for their projects are our products or comparable to our products. Municipalities often require contractors to use the same products that have been specified by that municipality.
Mueller Co.’s extensive installed base, broad product range and well-known brands have led to many long-standing relationships with the key distributors in the principal markets we serve. Our distribution network covers all of the major locations for our principal products in the United States and Canada. Although we have long-standing relationships with most of our key distributors, we typically do not have long-term contracts with them, including our two largest distributors, which together accounted for approximately 35%, 34% and 34% of Mueller Co.’s gross sales in 2016, 2015 and 2014, respectively. The loss of either of these distributors would have a material adverse effect on our business. See “Item 1A. RISK FACTORS-Our business depends on a small group of key customers for a significant portion of our sales.”
Anvil
Anvil sells its products primarily to distributors who then resell the products to a wide variety of end users, including commercial contractors. At September 30, 2016, Anvil’s sales force consisted of 117 sales and customer service representatives and 27 independent sales representatives. Anvil ships products primarily from four regional distribution centers. Approximately 5%, 6% and 5% of Anvil’s net sales were to Canadian customers in 2016, 2015 and 2014, respectively.
Anvil generally does not have long-term contracts with its distributors, although it has long-standing relationships with most of its key distributors. Anvil’s top five distributors together accounted for approximately 25%, 23%, and 23% of Anvil’s gross sales in 2016, 2015 and 2014, respectively. The loss of any one of these distributors could have a material adverse effect on our business. See “Item 1A. RISK FACTORS-Our business depends on a small group of key customers for a significant portion of our sales.”
Mueller Technologies
Mueller Systems sells its water metering systems, products and services directly to municipalities and to waterworks distributors. Echologics sells water leak detection and pipe condition assessment products and services primarily to end users. At September 30, 2016, Mueller Technologies’ companies had 37 sales representatives in the field and 2 independent manufacturer’s representatives. The Mueller Technologies businesses’ five largest customers accounted for approximately 49%, 54% and 56% of segment gross sales in 2016, 2015 and 2014, respectively. See “Item 1A. RISK FACTORS-Our business depends on a small group of key customers for a significant portion of our sales.”

6

Table of Contents
Index to Financial Statements


Backlog
We consider backlog to represent orders placed by customers for which goods or services have yet to be delivered. Backlog is a meaningful indicator for the Henry Pratt business unit of Mueller Co. and the Mueller Systems business unit of Mueller Technologies. Henry Pratt manufactures valves and other parts for large projects that typically require design and build specifications. The delivery lead time for parts used for these projects can be as long as nine months, and we expect approximately 10% of Henry Pratt’s backlog at the end of 2016 will not be shipped until beyond 2017. Mueller Systems manufactures or sources water meter systems that are sometimes ordered in large quantities with delivery dates over several years, and we expect approximately 30% of Mueller Systems’ backlog will not be shipped until beyond 2017. Backlog for Henry Pratt and Mueller Systems is presented below.
 
September 30,
 
2016
 
2015
 
(in millions)
Henry Pratt
$
67.8

 
$
61.6

Mueller Systems
31.4

 
17.3

Sales cycles for metering systems can span several years and it is common for customers to place orders throughout the contract period. Although we believe we have a common understanding with our customer as to the total value of a contract when it is awarded, we do not recognize backlog until customer orders are received.
Competition
The U.S. and Canadian markets for water infrastructure, flow control and piping component system products are very competitive. See “Item 1A. RISK FACTORS-Strong competition could adversely affect prices and demand for our products and services, which would adversely affect our operating results.” There are only a few competitors for most of our product and service offerings. Many of our competitors are well-established companies with products that have strong brand recognition. We consider our installed base, product quality, customer service level, brand recognition, innovation, distribution and technical support to be competitive strengths.
The competitive environment for most of Mueller Co.’s valve and hydrant products is mature and many end users are slow to transition to brands other than their historically preferred brand. It is difficult to increase market share in this environment. We believe Mueller Co. fire hydrants and valves enjoy strong competitive positions based primarily on the extent of their installed base, product quality, specified position and brand recognition. Its principal competitors for fire hydrants and iron gate valves are McWane, Inc. and American Cast Iron Pipe Company. The primary competitors for its brass products are The Ford Meter Box Company, Inc. and A.Y. McDonald Mfg. Co. Many brass valves are interchangeable among different manufacturers.
The markets for Anvil’s products are highly competitive, price-sensitive and vulnerable to the increased acceptance of products produced in perceived lower-cost countries, such as China and India. Anvil competes primarily on the basis of availability, service, price and breadth of product offerings. Its primary competitors are Ward Manufacturing L.L.C. for cast iron and malleable iron fittings, Victaulic Company and Tyco International Ltd. for ductile grooved fittings and ERICO International Corporation, Cooper Industries plc and Carpenter & Paterson, Inc. for pipe hangers. Historically, its mechanical and industrial customers have been slower to accept products manufactured outside the United States than its fire protection customers.
The markets for products and services sold by the Mueller Technologies businesses are very competitive. Mueller Systems sells water metering products and systems in the United States. We believe a substantial portion of this market is in the process of transitioning from manually read meters to automatically read meters, but we also expect this transition to be relatively slow and that many end users will be reluctant to adopt brands other than their historically preferred brand. Although Mueller Systems’ market position is relatively small, we believe its automatically read meters and associated technology are well positioned to gain a greater share of these markets. Its principal competitors are Sensus, Neptune Technology Group, Inc., Badger Meter, Inc., Aclara LLC and Itron, Inc. Echologics sells water leak detection and pipe condition assessment products and services in North America, the United Kingdom and select countries in Europe, Asia and the Middle East, with its primary markets being the United States and Canada. The worldwide market for leak detection and pipe condition assessment is highly fragmented with numerous competitors. Its more significant competitors are Pure Technologies Ltd., Gutermann AG, and Syrinix Ltd.

7

Table of Contents
Index to Financial Statements


Research and Development
Our primary research and development (“R&D”) facilities are located in Chattanooga, Tennessee for Mueller Co., in North Kingstown, Rhode Island for Anvil and in Middleborough, Massachusetts and Toronto, Ontario for Mueller Technologies. The primary focus of these operations is to develop new products, improve and refine existing products and obtain and assure compliance with industry approval certifications or standards (such as AWWA, UL, FM, NSF and The Public Health and Safety Company).  At September 30, 2016, we employed 93 people dedicated to R&D activities.  R&D expenses were $12.9 million, $14.9 million and $14.4 million during 2016, 2015 and 2014, respectively.
Regulatory and Environmental Matters
Our operations are subject to numerous federal, state and local laws and regulations, both within and outside the United States, in areas such as: competition, government contracts, international trade, labor and employment, tax, licensing, consumer protection, environmental protection, workplace health and safety, and others.  These and other laws and regulations impact the manner in which we conduct our business, and changes in legislation or government policies can affect our operations, both favorably and unfavorably. For example, the Comprehensive Environmental Response, Compensation and Liability Act (“CERCLA”) and similar state laws affect our operations by, among other things, imposing investigation and cleanup requirements for threatened or actual releases of hazardous substances. Under CERCLA, joint and several liability may be imposed on operators, generators, site owners, lessees and others regardless of fault or the legality of the original activity that caused or resulted in the release of the hazardous substances. Thus, we may be subject to liability under CERCLA and similar state laws for properties that (1) we currently own, lease or operate, (2) we, our predecessors, or former subsidiaries previously owned, leased or operated, (3) sites to which we, our predecessors or former subsidiaries sent waste materials, and (4) sites at which hazardous substances from our facilities’ operations have otherwise come to be located. The purchaser of U.S. Pipe has been identified as a “potentially responsible party” (“PRP”) under CERCLA in connection with a former manufacturing facility operated by U.S. Pipe that was in the vicinity of a Superfund site located in North Birmingham, Alabama. Under the terms of the acquisition agreement relating to our sale of U.S. Pipe, we agreed to indemnify the purchaser for certain environmental liabilities, including those arising out of the former manufacturing site in North Birmingham. Accordingly, the purchaser tendered the matter to us for indemnification, which we accepted. Ultimate liability for the site will depend on many factors that have not yet been determined, including the determination of EPA’s remediation costs, the number and financial viability of the other PRPs (there are four other PRPs currently) and the determination of the final allocation of the costs among the PRPs, if any. For more information regarding this matter as well as others that may affect our business, including our capital expenditures, earnings and competitive position, see “Item 1A. RISK FACTORS,” “Item 3. LEGAL PROCEEDINGS - Environmental,” “Item 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS - Contingencies” and Note 16. of the Notes to Consolidated Financial Statements.
Employees
At September 30, 2016, we employed approximately 3,900 people, of whom 93% work in the United States. At September 30, 2016, 64% of our hourly workforce was represented by collective bargaining agreements.
Our locations with employees covered by such agreements are presented below.
Location             
 
Expiration of current agreement(s)
Albertville, AL
 
October 2017
Aurora, IL
 
September 2018
Decatur, IL
 
June 2020
Tinley Park, IL
 
April 2018
Columbia, PA
 
May 2017 and August 2017
Chattanooga, TN
 
January 2017 and October 2019
Henderson, TN
 
December 2018
Simcoe, Canada
 
November 2018
We believe relations with our employees, including those represented by collective bargaining agreements, are good.
Geographic Information
See Note 15. of the Notes to Consolidated Financial Statements.

8

Table of Contents
Index to Financial Statements


Securities Exchange Act Reports
We file annual and quarterly reports, proxy statements and other information with the U.S. Securities and Exchange Commission (“SEC”). You may read and print materials that we have filed with the SEC from its website at www.sec.gov. Our SEC filings may also be viewed and copied at the SEC public reference room located at 100 F Street, N.E., Washington, D.C. 20549. You may call the SEC at 1-800-SEC-0330 for further information on the public reference room.
In addition, certain of our SEC filings, including our annual reports on Form 10-K, our quarterly reports on Form 10-Q, our current reports on Form 8-K and amendments to them can be viewed and printed free of charge from the investor information section of our website at www.muellerwaterproducts.com. Copies of our filings, specified exhibits and corporate governance materials are also available free of charge by writing us using the address on the cover of this annual report.
We are not including the information on our website as a part of, or incorporating it by reference into, this annual report.
Our principal executive offices are located at 1200 Abernathy Road N.E., Suite 1200, Atlanta, Georgia 30328, and our main telephone number at that address is (770) 206-4200.
Item 1A.    RISK FACTORS
Our end markets are subject to risks relating to general economic cycles and conditions, which affect demand for our products and services and may adversely affect our financial results.
Our primary end markets are municipal water distribution and treatment systems, new water and wastewater infrastructure associated with new residential construction and the non-residential construction industry. Sustained uncertainty about any of these end markets could cause our distributors and end use customers to delay purchasing, or determine not to purchase, our products or services. General economic and other factors, including unemployment levels, energy costs, the state of the credit markets (including municipal bonds, mortgages, home equity loans and consumer credit) and other factors beyond our control, could adversely affect our sales, profitability and cash flows.
A significant portion of our business depends on spending for water and wastewater infrastructure construction activity.
A significant portion of our business depends on local, state and federal spending on water and wastewater infrastructure upgrade, repair and replacement. Funds for water and wastewater infrastructure repair and replacement typically come from local taxes, water fees and water rates. State and local governments and private water entities that do not adequately budget for capital expenditures when setting tax rates, water rates and water fees, as applicable, may be unable to pay for water infrastructure repair and replacement if they do not have access to other funding sources. Governments and private water entities may have limited abilities to increase taxes, water fees or water rates, as applicable. It is not unusual for water and wastewater projects to be delayed and rescheduled for a number of reasons, including changes in project priorities and difficulties in complying with environmental and other governmental regulations. In addition, reductions or delays in federal spending related to water or wastewater infrastructure could adversely affect state or local projects and may adversely affect our financial results.
Some state and local governments have placed or may place significant restrictions on the use of water by their constituents. These types of water use restrictions may lead to reduced water revenues by private water entities, municipalities or other governmental agencies, which could similarly affect funding decisions for water-related projects.
Poor economic conditions may cause states, municipalities or private water entities to receive lower than anticipated revenues, which may lead to reduced or delayed funding for water infrastructure projects. Even if favorable economic conditions exist, water infrastructure owners may choose not to address deferred infrastructure needs due to a variety of political factors or competing spending priorities.
Low levels of spending for water and wastewater infrastructure construction activity could adversely affect our sales, profitability and cash flows.

9

Table of Contents
Index to Financial Statements


Residential construction activity is important to our business and adverse conditions or sustained uncertainty regarding this market could adversely affect our financial results.
Because a significant portion of our business depends on new water and wastewater infrastructure spending, which in turn largely depends on residential construction, our financial performance depends significantly on the stability and growth of the residential construction market. This market depends on a variety of factors beyond our control, including household formation, consumer confidence, interest rates and the availability of mortgage financing, as well as the mix between single and multifamily construction and ultimately the extent to which new construction leads to the development of raw land. Adverse conditions or sustained uncertainty regarding the residential construction market could adversely affect our sales, profitability and cash flows.
Non-residential construction activity is also important to our business and adverse conditions or sustained uncertainty regarding this market could adversely affect our financial results.
Non-residential construction is also important to our business. Accordingly, our business has been significantly and adversely affected by declines in non-residential commercial construction activity due to, among other things, tight credit markets and reductions in construction spending, more generally. Sustained uncertainty regarding non-residential development could pose a risk to us as market participants may postpone spending until conditions improve, which would adversely affect demand for some of our products. Adverse conditions or sustained uncertainty regarding the non-residential construction market could adversely affect our sales, profitability and cash flows.
Our business depends on a small group of key customers for a significant portion of our sales.
Mueller Co. and Anvil products are sold primarily to distributors and our success depends on these outside parties operating their businesses profitably and effectively. These distributors’ profitability and effectiveness can vary significantly from company to company and from region to region within the same company. Further, our largest distributors generally also carry competing products. We may fail to align our operations with successful distributors in any given market.
Distributors in our industry have experienced consolidation in recent years. If such consolidation continues, our distributors could be acquired by other distributors who have better relationships with our competitors and pricing and profit margin pressure may intensify. Pricing and profit margin pressure or the loss of any one of our key distributors in any market could adversely affect our operating results.
The Mueller Technologies companies primarily sell directly to end users. Some of these customers represent a relatively high concentration of net sales. Over time, expected growth in sales is expected to lessen the significance of individual customers. In the short term, net sales could decline if existing significant customers do not continue to purchase our products or services and new customers are not obtained to replace them.
Strong competition could adversely affect prices and demand for our products and services, which would adversely affect our operating results.
The U.S. and Canadian markets for water infrastructure, flow control and piping component products are very competitive. While there are only a few competitors for most of our product and service offerings, many of our competitors are well-established companies with strong brand recognition. We compete on the basis of a variety of factors, including the quality, price and innovation of our products, services and service levels. Anvil’s products in particular also compete on availability and breadth of product offerings and are sold in fragmented markets with low barriers to entry. Our ability to retain our customers in the face of competition depends on our ability to market our products and services to our customers and end users effectively.
The U.S. markets for water metering products and systems are highly competitive. Our primary competitors benefit from strong market positions and many end users are slow to transition to new products or new brands. Our ability to gain customers depends on our technological advancements and ability to market our products and services to our customers and end users effectively.
In addition to competition from North American companies, we face the threat of competition from outside of North America. The intensity of competition from these companies is affected by fluctuations in the value of the U.S. dollar against their local currencies, the cost to ship competitive products into North America and the availability of trade remedies, if any. Competition may also increase as a result of U.S. competitors shifting their operations to lower-cost countries or otherwise reducing their costs.

10

Table of Contents
Index to Financial Statements


Our competitors may reduce the prices of their products or services, improve their quality, improve their functionality or enhance their marketing or sales activities. Any of these potential developments could adversely affect our prices and demand for our products and services.
The long-term success of our newer technologies, such as smart metering and leak detection and pipe condition assessment – which are key to the Mueller Technologies businesses – depends on market acceptance and our ability to manage the risks associated with the introduction of new products and systems.
Our newer technologies comprise smart metering and leak detection and pipe condition assessment products and services. These technologies are principally associated with our Mueller Systems and Echologics businesses, respectively. Our investments in smart metering have primarily focused on the market for AMI and have been based on our belief that water utilities will transition over time from traditional manually-read meters to automatically-read meters. The market for AMI is relatively new and evolving, and the U.S. markets for water meter products and systems are highly competitive. Water utilities have traditionally been slow adopters of new technology and may not adopt AMI as quickly as we expect, due, in part, to the substantial investment related to installation of AMI systems. The strong market positions of our primary competitors may also slow the adoption of our products. Similarly, the adoption of our leak detection and pipe condition assessment products and services depends on the willingness of our customers to invest in new product and service offerings, and the pace of adoption may be slower than we expect. If the market for AMI develops more slowly than we expect or if our new leak detection and pipe condition assessment products and services fail to gain market acceptance, our opportunity to grow these businesses will be limited.
In addition, the success of our new products and systems will depend on our ability to manage the risks associated with their introduction, including the risk that new products and systems may have quality or other defects or deficiencies in their early stages that result in their failure to satisfy performance or reliability requirements. Our success will depend in part on our ability to manage these risks, including costs associated with manufacturing, installation, maintenance and warranties. These challenges can be costly and technologically challenging, and we cannot determine in advance the ultimate effect they may have. Failure to successfully manage these challenges could result in lost revenue, significant warranty and other expenses, and harm to our reputation.
Our business strategy includes developing, acquiring and investing in companies and technologies that broaden our product portfolio or complement our existing business, which could be unsuccessful or consume significant resources and adversely affect our operating results.
We will continue to evaluate the development or acquisition of strategic businesses, technologies and product lines with the potential to strengthen our industry position, enhance our existing set of product and service offerings, or enter new markets. We may be unable to identify or successfully complete suitable acquisitions in the future and completed acquisitions may not be successful.
Acquisitions and technology investments may involve significant cash expenditures, debt incurrence, operating losses and expenses that could have a material adverse effect on our business, financial condition, results of operations and cash flows. These types of transactions involve numerous other risks, including:
diversion of management time and attention from existing operations;
difficulties in integrating acquired businesses, technologies and personnel into our business or into our compliance and control programs;
working with partners or other ownership structures with shared decision-making authority (our interests and other ownership interests may be inconsistent);
difficulties in obtaining and verifying relevant information regarding a business or technology prior to the consummation of the transaction, including the identification and assessment of liabilities, claims or other circumstances, including those relating to intellectual property claims, that could result in litigation or regulatory exposure;
assumptions of liabilities that exceed our assessed amounts;
verifying the financial statements and other business information of an acquired business;
inability to obtain required regulatory approvals and/or required financing on favorable terms;
potential loss of key employees, contractual relationships or customers;
increased operating expenses related to the acquired businesses or technologies;

11

Table of Contents
Index to Financial Statements


the failure of new technologies, products or services to gain market acceptance with acceptable profit margins;
entering new markets in which we have little or no experience or in which competitors may have stronger market positions;
dilution of interests of holders of our common shares through the issuance of equity securities or equity-linked securities; and
inability to achieve expected synergies.
Any acquisitions or investments may ultimately harm our business or financial condition, as they may not be successful and may ultimately result in impairment charges.
Inefficient or ineffective allocation of capital could adversely affect our operating results and/or stockholder value.
Our goal is to invest capital to maximize our overall long-term returns. This includes spending on capital projects, such as developing or acquiring strategic businesses, technologies and product lines with the potential to strengthen our industry position, enhancing our existing set of product and service offerings, or entering new markets, as well as periodically returning value to our stockholders through share repurchases and dividends. To a large degree, capital efficiency reflects how well we manage key risks. The actions taken to address specific risks may affect how well we manage the more general risk of capital efficiency. If we do not properly allocate our capital to maximize returns, we may fail to produce optimal financial results and we may experience a reduction in shareholder value, including increased volatility in our stock price.
Our reliance on vendors for certain products, some of which are single-source or limited source suppliers, could harm our business by adversely affecting product availability, reliability or cost.
We maintain several single-source or limited-source supplier relationships with manufacturers, including some outside of the United States. If the supply of a critical single- or limited-source product is delayed or curtailed, we may not be able to ship the related products in desired quantities or in a timely manner. Even where multiple sources of supply are available, qualification of the alternative suppliers and establishment of reliable supplies could result in delays and a possible loss of sales, which could harm our operating results.
These relationships reduce our direct control over production. Our reliance on these vendors subjects us to a greater risk of shortages, and reduced control over delivery schedules of products, as well as a greater risk of increases in product costs. In instances where we stock lower levels of product inventories, a disruption in product availability could harm our financial performance and our ability to satisfy customer needs. In addition, defective products from these manufacturers could reduce product reliability and harm our reputation.
A disruption in our supply chain or other factors impacting the distribution of our products could adversely affect our business.
A disruption within our logistics or supply chain network at any of the freight companies that deliver us components for our manufacturing operations in the United States or ship our fully-assembled products to our customers could adversely affect our business and result in lost sales or harm to our reputation. Our supply chain is dependent on third party ocean-going container ships, rail, barge and trucking systems and, therefore, disruption in these logistics services because of weather-related problems, strikes, bankruptcies or other events could adversely affect our financial performance and financial condition, negatively impacting sales, profitability and cash flows.
Transportation costs are relatively high for most of our products.
Transportation costs can be an important factor in a customer’s purchasing decision. Many of our products are big, bulky and heavy, which tend to increase transportation costs. We also have relatively few manufacturing sites, which tends to increase transportation distances to our customers and costs. High transportation costs could make our products less competitive compared to similar or alternative products offered by competitors.

12

Table of Contents
Index to Financial Statements


Normal operations at our key manufacturing facilities may be interrupted.
Some of our key products, including fire hydrants and iron gate valves, are manufactured at single or few manufacturing facilities that depend on critical pieces of heavy equipment that cannot be economically moved to other locations. We are therefore limited in our ability to shift production among locations. The operations at our manufacturing facilities may be interrupted or impaired by various operating risks, including, but not limited to:
catastrophic events, such as fires, floods, explosions, natural disasters, severe weather or other similar occurrences;
interruptions in the delivery of raw materials or other manufacturing inputs;
adverse government regulations;
equipment breakdowns or failures;
information systems failures;
violations of our permit requirements or revocation of permits;
releases of pollutants and hazardous substances to air, soil, surface water or ground water;
shortages of equipment or spare parts; and
labor disputes.
The occurrence of any of these events may impair our production capabilities and adversely affect our sales, profitability and cash flows.
Any inability to protect our intellectual property or our failure to effectively defend against intellectual property infringement claims could adversely affect our competitive position.
Our business depends on our technology and expertise, which were largely developed internally and are not subject to statutory protection. We rely on a combination of patent protection, copyright and trademark laws, trade secrets protection, employee and third-party confidentiality agreements and technical measures to protect our intellectual property rights. The measures that we take to protect our intellectual property rights may not adequately deter infringement, misappropriation or independent development of our technology, and they may not prevent an unauthorized party from obtaining or using information or intellectual property that we regard as proprietary or keep others from using brand names similar to our own. The disclosure, misappropriation or infringement of our intellectual property could harm our competitive position. In addition, our actions to enforce our rights may result in substantial costs and the diversion of management time and other resources. We may also be subject to intellectual property infringement claims from time to time, which may result in additional expenses and diverting resources to respond to these claims. Finally, for those products in our portfolio that rely on patent protection, once a patent has expired the product is more subject to competition. Products under patent protection potentially generate significantly higher revenue and earnings than those not protected by patents. If we fail to successfully enforce our intellectual property rights or register new patents, our competitive position could suffer, which could adversely affect our business, financial condition, results of operations and cash flows.
If we do not successfully maintain our information and technology networks, including the security of those networks, our operations could be disrupted and unanticipated increases in costs and/or decreases in revenues could result.
We rely on various information technology systems,some of which are controlled by outside service providers, to manage key aspects of our operations. The proper functioning of our information technology systems is important to the successful operation of our business. If critical information technology systems fail, or are otherwise unavailable, our ability to manufacture products, process orders, track credit risk, identify business opportunities, maintain proper levels of inventories, collect accounts receivable, pay expenses and otherwise manage our business would be adversely affected.
We depend on the Internet and our information technology infrastructure for electronic communications among our locations around the world and between our personnel and suppliers and customers. Security breaches of this infrastructure can create system disruptions, shutdowns or unauthorized disclosure of confidential information. If we or our service providers are unable to prevent these breaches, our operations could be disrupted or we may suffer financial, reputational or other harm because of lost or misappropriated information.

13

Table of Contents
Index to Financial Statements


We may fail to effectively manage personal data, which could harm our reputation, result in substantial additional costs and subject us to litigation.
As we grow our Mueller Technologies businesses, we continue to accumulate increasing volumes of customer data. In addition, we store personal information in connection with our human resources operations. Our efforts to protect this information may be unsuccessful due to employee errors or malfeasance, technical malfunctions, the actions of third parties (such as cyber attack) or other factors. If we are unable to protect personal data, it could be accessed or disclosed improperly, which could expose us to liability, harm our reputation and deter current and potential users from using our products and services. The regulatory environment related to information security, data collection and privacy is increasingly rigorous, with new and constantly changing requirements applicable to our business, and compliance with those requirements could result in additional costs.
We are subject to a variety of claims, investigations and litigation that could adversely affect our results of operations and harm our reputation.
In the normal course of our business, we are subject to claims and lawsuits, including from time to time claims for damages related to product liability and warranties, investigations by governmental agencies, litigation alleging the infringement of intellectual property rights and litigation related to employee matters and commercial disputes. Defending these lawsuits and becoming involved in these investigations may divert our management’s attention, and may cause us to incur significant expenses. In addition, we may be required to pay damage awards, penalties or settlements, or become subject to injunctions or other equitable remedies, that could have a material adverse effect on our business, financial condition, results of operations and cash flows. If we were required to participate in a product recall or take other action to address a product liability or other claim, our reputation could be harmed. Moreover, any insurance or indemnification rights that we have may be insufficient or unavailable to protect us against potential loss exposures. See “Item 1. BUSINESS - Regulatory and Environmental Matters,” “Item 3. LEGAL PROCEEDINGS - Environmental,” “Item 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS - Contingencies” and Note 16. of the Notes to Consolidated Financial Statements.
We are subject to increasingly stringent environmental, health and safety laws and regulations that impose significant compliance costs. Any failure to satisfy these laws and regulations may adversely affect us.
We are subject to increasingly stringent laws and regulations relating to the protection of the environment, health and safety and incur significant capital and other expenditures to comply with these requirements. Failure to comply with any environmental, health or safety requirements could result in the assessment of damages, the imposition of penalties, suspension of production, changes to equipment or processes or a cessation of operations at our facilities, any of which could have a material adverse effect on our business. Because these laws are complex, subject to change and may be applied retroactively, we cannot predict with certainty the extent of our future liabilities with respect to environmental, health and safety matters and whether they will be material.
In addition, certain statutes such as CERCLA may impose joint and several liability for the costs of remedial investigations and actions on entities that generated waste, arranged for disposal of waste, transported to or selected the disposal sites and the past and present owners and operators of such sites. All such PRPs (or any one of them, including us) may be required to bear all of such costs regardless of fault, the legality of the original disposal or ownership of the disposal site. As a result, we may be required to conduct investigations and perform remedial activities at current and former operating and manufacturing sites where we have been, or in the future could be, named a PRP with respect to such environmental liabilities, any of which could require us to incur material costs. The final remediation costs of these environmental sites may exceed current estimated costs, and additional sites in the future may require material remediation expenses. If actual expenditures exceed our estimates, our results of operations and financial position could be materially and adversely affected. See “Item 1. BUSINESS - Regulatory and Environmental Matters,” “Item 3. LEGAL PROCEEDINGS - Environmental,” “Item 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS - Contingencies” and Note 16. of the Notes to Consolidated Financial Statements.

14

Table of Contents
Index to Financial Statements


We manage our business as a decentralized organization, which presents risks.
We have three segments that operate under a decentralized organizational structure. Our operations have different business practices, information technology systems, accounting policies, internal controls, procedures and compliance programs. Further, we may need to modify existing programs and processes to increase efficiency and operating effectiveness and improve corporate visibility into our decentralized operations. We also regularly update compliance programs and processes to comply with existing laws, new interpretations of existing laws and new laws and we may not implement those modifications effectively. It could take time for any such modifications to be implemented across our operations. During the implementation periods, our decentralized operating approach could result in inconsistent management practices and procedures, which could adversely affect our business. Once achieved, it may also be difficult to maintain operational consistency across our organization.
We rely on successors to Tyco to indemnify us for certain liabilities and they may become financially unable or fail to comply with the terms of the indemnity.
Under the terms of the acquisition agreement relating to the August 1999 sale by Tyco of our businesses to a previous owner of these businesses, we are indemnified by certain Tyco entities (“Tyco Indemnitors”) for all liabilities arising in connection with the operation of these businesses prior to their sale by Tyco, including with respect to products manufactured or sold prior to the closing of that transaction, as well as certain environmental liabilities. These indemnities survive indefinitely and are not subject to any dollar limits. In the past, Tyco Indemnitors have made substantial payments and assumed defense of claims in connection with these indemnification obligations. Tyco’s indemnity does not cover liabilities to the extent caused by us or the operation of our businesses after August 1999, nor does it cover liabilities arising with respect to businesses or sites acquired after August 1999. Since 2007, Tyco has engaged in multiple corporate restructurings, split-offs and divestitures. The result of these transactions is that the assets of, and control over, Tyco Indemnitors has changed. Should any Tyco Indemnitor become financially unable or fail to comply with the terms of the indemnity, we may be responsible for such obligations or liabilities.
We may have substantial additional liability for federal income tax allegedly owed by Walter Energy.
We were spun-off from Walter Energy, Inc. on December 14, 2006. Under federal tax rules, each member of a consolidated group for federal income tax purposes is jointly and severally liable for the federal income tax liability of each other member of the consolidated group for any year in which it is a member of the group at any time during such year. In other words, each member of Walter Energy’s consolidated tax group, which included us (and our subsidiaries) through the date of our spin-off from Walter Energy (i.e., December 14, 2006), is jointly and severally liable for the federal income tax liability of each other member of Walter Energy’s consolidated group for any year in which it is a member of the group. Accordingly, we could be liable in the event any such liability is incurred, and not discharged, by any other member of Walter Energy’s consolidated group for any period during which we were included in the Walter Energy consolidated group.
A dispute currently exists with regard to federal income taxes for years 1980 to 1994 and 1999 to 2001 allegedly owed by the Walter Energy consolidated group. As described above, because we were a member of Walter Energy’s consolidated group during these years, we are jointly and severally liable for any final tax determination with respect to these years, which means that in the event Walter Energy is unable to pay any amounts owed, we would be liable. Walter Energy filed a petition for reorganization under Chapter 11 of the U.S. Bankruptcy Code in July 2015. We are monitoring the filing to determine whether we could be liable for all or a portion of any federal income tax liability resulting from this dispute if it is incurred, and not discharged, for any period during which we were included in the Walter Energy consolidated group. See Note 16. of the Notes to Consolidated Financial Statements.
Our expenditures for pension obligations could be materially higher than we have predicted.
We provide pension benefits to certain current and former employees. To determine our future payment obligations under the plans, certain rates of return on the plans’ assets, growth rates of certain costs and participant longevity have been estimated. The proportion of the assets held by our U.S. pension plan invested in fixed income securities, instead of equity securities, has increased over historical levels. This shift in asset allocation has resulted in a decrease in the estimated rate of return on plan assets for this plan. Assumed discount rates, expected return on plan assets and participant longevity have significant effects on the amounts reported for the pension obligations and pension expense.
The funded status of our pension plans can also be influenced by regulatory requirements, which can change unexpectedly and impose higher costs if funding levels are below certain thresholds. We may increase contributions to our pension plans to avoid or reduce these higher costs.

15

Table of Contents
Index to Financial Statements


Significant adverse changes in credit and capital markets or changes in investments could result in discount rates or actual rates of return on plan assets being materially lower than projected and require us to increase pension contributions in future years to meet funding level requirements. Increasing life spans for plan participants may increase the estimated benefit payments and increase the amounts reported for pension obligations, pension contributions and pension expense. If increased funding requirements are particularly significant and sustained, our overall liquidity could be materially reduced, which could cause us, among other things, to reduce investments and capital expenditures, or restructure or refinance our debt.
Any failure to satisfy international trade laws and regulations or to otherwise comply with changes or other trade developments may adversely affect us.
Our operations require importing and exporting goods and technology between countries on a regular basis. Thus, the sale and shipment of our products and services across international borders, as well as the purchase of components and products from international sources, subject us to extensive trade laws and regulations. Trade laws and regulations are complex, differ by country, and are enforced by a variety of government agencies. Because we are subject to extensive trade laws and regulations in the countries in which we operate, we are subject to the risk that laws and regulations could change in a way that would expose us to additional costs, penalties or liabilities, and our policies and procedures may not always protect us from actions that would violate international trade laws and regulations. For example, certain federal legislation requires the use of American iron and steel products in certain water projects receiving certain federal appropriations. We have incurred costs in connection with ensuring our ability to certify to these requirements, including those associated with enhancing our assembly operations and sourcing practices. As a result of the varying legal and regulatory requirements to which our cross-border activities are subject, we may not always be in compliance with the trade laws and regulations in all respects. Any improper actions could subject us to civil or criminal penalties, including material monetary fines, or other adverse actions, including denial of import or export privileges, and could harm our reputation and our business prospects.
Our high fixed costs may make it more difficult for us to respond to economic cycles.
A significant portion of our cost structure is fixed, including manufacturing overhead, capital equipment and research and development costs. In a prolonged economic downturn, these fixed costs may cause our gross margins to erode and earnings to decline.
The prices of our purchased components and raw materials can be volatile.
Our operations require substantial amounts of purchased components and raw materials, such as scrap steel, sand, resin, brass ingot and steel pipe. We generally purchase components and raw materials at current market prices. The cost and availability of these materials are subject to economic forces largely beyond our control, including North American and international demand, foreign currency exchange rates, freight costs and commodity speculation.
We may not be able to pass on the entire cost of price increases for purchased components and raw materials to our customers or offset fully the effects of these higher costs through productivity improvements. In particular, when purchased component or raw material prices increase rapidly or to significantly higher than normal levels, we may not be able to pass cost increases through to our customers on a timely basis, if at all, which would reduce our profitability and cash flows. In addition, if purchased components or raw materials were not available or not available on commercially reasonable terms, our sales, profitability and cash flows would be reduced. Our competitors may secure more reliable sources of purchased components and raw materials or they may obtain these supplies on more favorable terms than we do, which could give them a cost advantage.
Potential international business opportunities may expose us to additional risks.
A part of our growth strategy depends on us expanding internationally. Although net sales outside of the United States and Canada account for a small percentage of our total net sales, we expect to increase our level of business activity outside of the United States and Canada. Some countries that present good business opportunities also face political and economic instability and vulnerability to infrastructure and other disruptions. Seeking to expand our business internationally exposes us to additional risks, which include political and economic uncertainties, currency fluctuations, changes in local business conditions and national and international conflicts. A primary risk we face in connection with our export shipments relates to our ability to collect amounts due from customers. We also face the potential risks arising from staffing, monitoring and managing international operations, including the risk such activities may divert our resources and management time.
In addition, compliance with the laws and regulations of multiple international jurisdictions increases our cost of doing business. International operations are subject to anti-corruption laws and anti-competition regulations, among others. For example, the U.S. Foreign Corrupt Practices Act and similar non-U.S. anti-corruption laws generally prohibit companies and their intermediaries from making improper payments or providing anything of value to improperly influence foreign

16

Table of Contents
Index to Financial Statements


government officials and certain others for the purpose of obtaining or retaining business, or obtaining an unfair advantage. Violations of these laws and regulations could result in criminal and civil sanctions, disrupt our business and adversely affect our brands, international expansion efforts, business and operating results.
Seasonal demand for certain of our products and services may adversely affect our financial results.
Sales of some of our products, including iron gate valves and fire hydrants, are seasonal, with lower sales in our first and second fiscal quarters when weather conditions throughout most of North America tend to be cold resulting in lower levels of construction activity. This seasonality in demand has resulted in fluctuations in our sales and operating results. To satisfy demand during expected peak periods, we may incur costs associated with building inventory in off-peak periods, and our projections as to future needs may not be accurate. Because many of our expenses are fixed, seasonal trends can cause reductions in our profitability and profit margins and deterioration of our financial condition during periods affected by lower production or sales activity.
Failure to attract, motivate, train and retain qualified personnel, including key personnel, could adversely affect our business.
Our ability to expand or maintain our business depends on our ability to hire, train and retain employees with the skills necessary to understand and adapt to the continuously developing needs of our customers. The increasing demand for qualified personnel makes it more difficult for us to attract and retain employees with requisite skill sets, particularly employees with specialized technical and trade experience. Changing demographics and labor work force trends also may result in a loss of knowledge and skills as experienced workers retire. If we fail to attract, motivate, train and retain qualified personnel, or if we experience excessive turnover, we may experience declining sales, manufacturing delays or other inefficiencies, increased recruiting, training and relocation costs and other difficulties, and our business, financial condition, results of operations and cash flows could be materially and adversely affected. Competition for qualified personnel is intense, particularly in several regions of the United States where we manufacture products and particularly within our Mueller Technologies businesses. We may not be successful in attracting or retaining qualified personnel, which could negatively impact our business.
In addition, our business depends on the efforts, skills, reputations and business relationships of key executive and management personnel. The loss of any of our key personnel could jeopardize our relationships with customers and may adversely affect our business, financial condition, results of operations and cash flows.
We may be affected by new governmental legislation and regulations relating to carbon dioxide emissions.
Many of our manufacturing plants use significant amounts of electricity generated by burning fossil fuels, which releases carbon dioxide. Federal and state courts and administrative agencies are considering the scope and scale of carbon dioxide emission regulation under various laws pertaining to the environment, energy use and development and greenhouse gas emissions. In addition, several states are considering various carbon dioxide registration and reduction programs. The final details and scope of these various legislative, regulatory and policy measures are unclear and their potential impact is still uncertain, so we cannot fully predict the impact on our business.
The potential impacts of climate change on our operations are highly uncertain. The EPA has found that global climate change could increase the severity and possibly the frequency of severe weather patterns. Although the financial impact of these potential changes is not reasonably estimable at this time, our operations in certain locations and those of our customers and suppliers could potentially be adversely affected, which could adversely affect our sales, profitability and cash flows.

17

Table of Contents
Index to Financial Statements


Item 2.
PROPERTIES
Our principal properties are listed below.
Location
 
Activity
 
Size
  (sq.  ft.)  
 
Owned or
leased
Mueller Co.:
 
 
 
 
 
 
Albertville, AL
 
Manufacturing
 
422,000

 
Leased
Aurora, IL
 
Manufacturing and distribution
 
231,000

 
Owned
Decatur, IL
 
Manufacturing
 
467,000

 
Owned
Hammond, IN
 
Manufacturing
 
51,000

 
Owned
Chattanooga, TN
 
Manufacturing
 
525,000

 
Owned
Chattanooga, TN
 
Research and development
 
22,000

 
Leased
Cleveland, TN
 
Manufacturing
 
109,500

 
Owned
Brownsville, TX
 
Manufacturing
 
50,000

 
Leased
Barrie, Ontario
 
Distribution
 
50,000

 
Leased
Jingmen, China
 
Manufacturing
 
154,000

 
Owned
Anvil:
 
 
 
 
 
 
Ontario, CA
 
Distribution
 
73,000

 
Leased
Columbia, PA
 
Manufacturing and distribution
 
663,000

 
Owned
Greencastle, PA
 
Manufacturing
 
135,000

 
Owned
Waynesboro, PA
 
Manufacturing
 
73,000

 
Owned
North Kingstown, RI
 
Manufacturing and research and development
 
164,000

 
Leased
Henderson, TN
 
Manufacturing
 
180,000

 
Owned
Houston, TX
 
Manufacturing and distribution
 
105,000

 
Owned
Irving, TX
 
Distribution
 
218,000

 
Leased
Longview, TX (1)
 
Manufacturing
 
114,000

 
Owned
Simcoe, Ontario
 
Distribution
 
107,000

 
Owned
  Tinley Park, IL
 
Distribution
 
130,000

 
Leased
Mueller Technologies:
 
 
 
 
 
 
Cleveland, NC
 
Manufacturing
 
190,000

 
Owned
Toronto, Ontario
 
Research and development
 
10,000

 
Leased
Corporate:
 
 
 
 
 
 
Atlanta, GA
 
Corporate headquarters
 
25,000

 
Leased
(1) We have announced our intention to close this facility and consolidate its operations with our Houston facility in March 2017.
We consider our facilities to be well maintained and believe we have sufficient capacity to meet our anticipated needs through 2017. Our leased properties have terms expiring at various dates through January 2024.

18

Table of Contents
Index to Financial Statements


Item 3.
LEGAL PROCEEDINGS
We are involved in various legal proceedings that have arisen in the normal course of operations, including the proceedings summarized below.
The effect of the outcome of these matters on our future results of operations cannot be predicted with certainty as any such effect depends on future results of operations and the amount and timing of the resolution of such matters. Other than the litigation described below, we do not believe any of our outstanding litigation would have a material adverse effect on our business or prospects.
Environmental. We are subject to a wide variety of laws and regulations concerning the protection of the environment, both with respect to the operations at many of our properties and with respect to remediating environmental conditions that may exist at our own or other properties. We accrue for environmental expenses resulting from existing conditions that relate to past operations when the costs are probable and reasonably estimable. These expenses were $4.2 million, $3.8 million and $1.2 million in 2016, 2015 and 2014, respectively. We capitalize environmental expenditures that increase the life or efficiency of long-term assets or that reduce or prevent environmental contamination. Capital expenditures for environmental requirements are anticipated to be approximately $1.1 million during 2017. Capitalized environmental-related expenditures were $0.2 million, $0.6 million and $0.1 million in 2016, 2015 and 2014, respectively.
Under the terms of the acquisition agreement relating to the August 1999 sale by Tyco of our businesses to a previous owner of these businesses, we are indemnified by certain Tyco entities (“Tyco Indemnitors”) for all liabilities arising in connection with the operation of these businesses prior to their sale by Tyco, including with respect to products manufactured or sold prior to the closing of that transaction, as well as certain environmental liabilities. These indemnities survive indefinitely and are not subject to any dollar limits. In the past, Tyco Indemnitors have made substantial payments and assumed defense of claims in connection with these indemnification obligations. Tyco’s indemnity does not cover liabilities to the extent caused by us or the operation of our businesses after August 1999, nor does it cover liabilities arising with respect to businesses or sites acquired after August 1999. Since 2007, Tyco has engaged in multiple corporate restructurings, split-offs and divestitures. While none of these transactions directly affects the indemnification obligations of the Tyco Indemnitors under the 1999 acquisition agreement, the result of such transactions is that the assets of, and control over, such Tyco Indemnitors has changed. Should any of these Tyco Indemnitors become financially unable or fail to comply with the terms of the indemnity, we may be responsible for such obligations or liabilities.
In September 1987, we implemented an Administrative Consent Order (“ACO”) for our Burlington, New Jersey property, which was required under the New Jersey Environmental Cleanup Responsibility Act (now known as the Industrial Site Recovery Act). The ACO required soil and ground-water cleanup, and we completed, and received final approval on, the soil cleanup required by the ACO. We retained this property following the sale of U.S. Pipe. We expect ground-water issues as well as issues associated with the demolition of former manufacturing facilities at this site will continue and remediation by us could be required. Long-term ground-water monitoring may also be required, but we do not know how long such monitoring would be required and do not believe monitoring or further remediation costs, if any, will have a material adverse effect on our financial condition or results of operations.
On July 13, 2010, Rohcan Investments Limited, the former owner of property leased by Mueller Canada Ltd. and located in Milton, Ontario, filed suit against Mueller Canada Ltd. and its directors seeking C$10 million in damages arising from the defendants’ alleged environmental contamination of the property and breach of lease. Mueller Canada Ltd. leased the property from 1988 through 2008. We are pursuing indemnification from a former owner for certain potential liabilities that are alleged in this lawsuit, and we have accrued for other liabilities not covered by indemnification.  On December 7, 2011, the Court denied the plaintiff’s motion for summary judgment.

19

Table of Contents
Index to Financial Statements


The purchaser of U.S. Pipe has been identified as a PRP under CERCLA in connection with a former manufacturing facility operated by U.S. Pipe that was in the vicinity of a proposed Superfund site located in North Birmingham, Alabama. Under the terms of the acquisition agreement relating to our sale of U.S. Pipe, we agreed to indemnify the purchaser for certain environmental liabilities, including those arising out of the former manufacturing site in North Birmingham. Accordingly, the purchaser tendered the matter to us for indemnification, which we accepted. Ultimate liability for the site will depend on many factors that have not yet been determined, including the determination of EPA’s remediation costs, the number and financial viability of the other PRPs (there are four other PRPs currently) and the determination of the final allocation of the costs, if any, among the PRPs. Accordingly, because the amount of such costs cannot be reasonably estimated at this time, no amounts had been accrued for this matter at September 30, 2016. See “Item 1. BUSINESS - Regulatory and Environmental Matters,” “Item 1A. RISK FACTORS - We are subject to increasingly stringent environmental, health and safety laws and regulations that impose significant compliance costs. Any failure to satisfy these laws and regulations may adversely affect us,” “Item 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS - Contingencies” and Note 16. of the Notes to Consolidated Financial Statements.
Walter Energy. Each member of the Walter Energy consolidated group, which included us (including our subsidiaries) through December 14, 2006, is jointly and severally liable for the federal income tax liability of each other member of the consolidated group for any year in which it is a member of the group at any time during such year.  Accordingly, we could be liable in the event any such federal income tax liability is incurred, and not discharged, by any other member of the Walter Energy consolidated group for any period during which we were included in the Walter Energy consolidated group.
Walter Energy effectively controlled all of our tax decisions for periods during which we were a member of the Walter Energy consolidated group for federal income tax purposes and certain combined, consolidated or unitary state and local income tax groups.  Under the terms of an income tax allocation agreement between us and Walter Energy, dated May 26, 2006, we generally computed our tax liability on a stand-alone basis, but Walter Energy has sole authority to respond to and conduct all tax proceedings (including tax audits) relating to our federal income and combined state tax returns, to file all such tax returns on our behalf and to determine the amount of our liability to (or entitlement to payment from) Walter Energy for such previous periods.
According to Walter Energy’s quarterly report on Form 10-Q filed with the SEC on November 5, 2015 (“Walter November 2015 Filing”), a dispute exists with the IRS with regard to federal income taxes for years 1980 to 1994 and 1999 to 2001 allegedly owed by the Walter Energy consolidated group, which included U.S. Pipe during these periods.  As a matter of law, we are jointly and severally liable for any final tax determination, which means we would be liable in the event Walter Energy is unable to pay any amounts owed. According to the Walter November 2015 Filing, at September 30, 2015, Walter Energy had $33.0 million of accruals for unrecognized tax benefits on the matters subject to disposition. In the Walter November 2015 Filing, Walter Energy stated it believed it had sufficient accruals to address any claims, including interest and penalties, and did not believe that any potential difference between any final settlements and amounts accrued would have a material effect on Walter Energy’s financial position, but such potential difference could be material to its results of operations in a future reporting period.
Walter Energy filed a petition for reorganization under Chapter 11 of the U.S. Bankruptcy Code in July 2015, which is pending before the Bankruptcy Court for the Northern District of Alabama (“Bankruptcy Case”).  We continue to monitor the progress of the Bankruptcy Case to determine whether we could be liable for all or a portion of this federal income tax liability if it is incurred, and not discharged, for any period during which we were included in the Walter Energy consolidated group.
On January 11, 2016, the IRS filed a proof of claim in the Bankruptcy Case, alleging that Walter Energy owes amounts for prior taxable periods (specifically, 1983-1994, 2000-2002 and 2005) in an aggregate amount of $554.3 million ($229.1 million of which the IRS claims is entitled to priority status in the Bankruptcy Case).  The IRS asserts that its claim is based on an alleged settlement of Walter Energy’s tax liability for the 1983-1995 taxable periods in connection with Walter Energy’s prior bankruptcy proceeding in the United States Bankruptcy Court for the Middle District of Florida.  In the proof of claim, the IRS included an alternative calculation in the event the alleged settlement of the prior bankruptcy court is found to be non-binding, which provides for a claim by the IRS in an aggregate amount of $860.4 million ($535.3 million of which the IRS claims is entitled to priority status in the Bankruptcy Case).
According to a current report on Form 8-K filed by Walter Energy with the SEC on April 1, 2016 (“Walter April 2016 Filing”), on March 31, 2016, Walter Energy closed on the sale of substantially all of Walter Energy’s Alabama assets pursuant to the provisions of Sections 105, 363 and 365 of the Bankruptcy Code.  The Walter April 2016 Filing further stated that Walter Energy would have no further material business operations after April 1, 2016 and Walter Energy was evaluating its options with respect to the wind down of its remaining assets.  The asset sale did not impact the IRS’ proof

20

Table of Contents
Index to Financial Statements


of claim filed in the Bankruptcy Case and the proof of claim, as well as the alleged tax liability thereunder, remain unresolved.
We cannot predict whether or to what extent we may become liable for the tax-related amounts of the Walter Energy consolidated group asserted in the IRS’ proof of claim filed in the Bankruptcy Case, in part, because: (i) the amounts owed by the Walter Energy consolidated group for certain of the taxable periods from 1980 through 2006 remain unresolved; (ii) it is unclear whether Walter Energy will be obligated to pay any or all of such amounts owed; and (iii) in the event Walter Energy does not discharge all tax obligations for the consolidated group, it is unclear whether and to what extent the IRS will seek to enforce claims against us and any other member of the Walter Energy consolidated group. Walter Energy stated in the Walter November 2015 Filing that it believes its tax filing positions have substantial merit and it intends to vigorously defend the claims asserted by the IRS. We also intend to vigorously assert any and all available defenses against any liability we may have as a member of the Walter Energy consolidated group. However, we cannot currently estimate our liability, if any, relating to the tax-related liabilities of Walter Energy’s consolidated tax group for tax years prior to 2007, and such liability could have a material adverse effect on our business, financial condition, liquidity or results of operations.
In accordance with the income tax allocation agreement entered into in connection with our spin-off from Walter Energy, Walter Energy used certain tax assets of one of our predecessors in its calendar 2006 tax return for which payment to us is required. The income tax allocation agreement only requires Walter Energy to make the payment upon realization of this tax benefit by receiving a refund or otherwise offsetting taxes due. Walter Energy owes us $11.6 million that is payable pending completion of an IRS audit of Walter Energy’s 2006 tax year and the related refund of tax from that year. As a result of the Bankruptcy Case, we wrote off this receivable during the quarter ended September 30, 2015
Other Matters. At September 30, 2016, Anvil was in a dispute with Victaulic Company (“Victaulic”) regarding two patents held by Victaulic, U.S. Patent 7,086,131 (the “131 Patent”) and U.S. Patent 7,712,796 (the “796 Patent” and collectively with the 131 Patent, the “U.S. Patents”), which Anvil believed were invalid.  The U.S. Patents potentially related to a coupling product currently manufactured and marketed by Anvil.  During the course of this dispute, Anvil filed multiple reexamination requests with the U.S. Patent and Trademark Office (the “PTO”) regarding the U.S. Patents, and the PTO granted the requests.  Although the PTO examiner initially invalidated most of the claims of the 796 Patent, the PTO examiner affirmed the validity of the 796 Patent in September 2014.  In April 2015, the PTO examiner invalidated the original claim of the 131 Patent but found several claims added during reexamination that appear substantially similar to those included in the 796 Patent patentable. The PTO examiners’ decisions with respect to the U.S. Patents were appealed to the Patent Trial and Appeal Board by Anvil and Victaulic. In July 2016, the Patent Trial and Appeal Board rejected as unpatentable all claims of the 131 Patent. Relatedly, at September 30, 2016, Anvil and Victaulic were also engaged in lawsuits with respect to these patent matters in the U.S. District Court for the Northern District of Georgia and in the Federal Court of Toronto, Ontario, Canada.  In October 2016, we entered into a settlement and license agreement with Victaulic, which amicably resolved all of these lawsuits and patent matters.
We are party to a number of other lawsuits arising in the ordinary course of business, including product liability cases for products manufactured by us or third parties. We provide for costs relating to these matters when a loss is probable and the amount is reasonably estimable. Administrative costs related to these matters are expensed as incurred. The effect of the outcome of these matters on our future results of operations cannot be predicted with certainty as any such effect depends on future results of operations and the amount and timing of the resolution of such matters. While the results of litigation cannot be predicted with certainty, we believe the final outcome of such other litigation is not likely to have a materially adverse effect on our business or prospects.

21

Table of Contents
Index to Financial Statements


PART II
Item 5.
MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
Our common stock is listed on the New York Stock Exchange under the trading symbol MWA.
Covenants contained in certain of the debt instruments described in Note 6. of the Notes to Consolidated Financial Statements restrict the amount we can pay in cash dividends. Future dividends will be declared at the discretion of our board of directors and will depend on our future earnings, financial condition and other factors.
The range of high and low intraday sales prices of our common stock and the dividends declared per share is presented below.
 
High     
 
Low     
 
 Dividends per share  
2016
 
 
 
 
 
4th quarter
$
13.50

 
$
11.18

 
$
0.0300

3rd quarter
11.75

 
9.55

 
0.0300

2nd quarter
9.94

 
7.52

 
0.0200

1st quarter
9.47

 
7.45

 
0.0200

2015
 
 
 
 
 
4th quarter
9.29

 
7.04

 
0.0200

3rd quarter
10.49

 
8.95

 
0.0200

2nd quarter
10.54

 
8.34

 
0.0175

1st quarter
10.48

 
7.92

 
0.0175

At September 30, 2016, there were 112 stockholders of record for our common stock.
Equity Compensation Plan Information
The information regarding our compensation plans under which equity securities are authorized for issuance is set forth in “Item 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS.”
Sale of Unregistered Securities
We did not issue any unregistered securities within the past three years.
Issuer Purchases of Equity Securities
We did not repurchase shares of our common stock in the quarter ended September 30, 2016.

22

Table of Contents
Index to Financial Statements


Stock Price Performance Graph
The following graph compares the cumulative quarterly stock market performance of our common stock with the Russell 2000 Stock Index (“Russell 2000”) and the Dow Jones U.S. Building Materials & Fixtures Index (“DJ Building Materials & Fixtures”) since September 30, 2011.
Total return values were calculated based on cumulative total return assuming (i) the investment of $100 in our common stock, the Russell 2000 and the DJ Building Materials & Fixtures on the dates indicated and (ii) reinvestment of all dividends.
mwa9302014_chart-03701a03.jpg

23

Table of Contents
Index to Financial Statements


Item 6.
SELECTED FINANCIAL DATA
The selected financial and other data presented below should be read in conjunction with, and are qualified by reference to, “Item 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS” and the consolidated financial statements and notes thereto included elsewhere in this annual report.
 
 
2016
 
2015
 
2014
 
2013
 
2012
 
 
(in millions, except per share data)
Statement of operations data:
 
 
 
 
 
 
 
 
 
 
Net sales
 
$
1,138.9

 
$
1,164.5

 
$
1,184.7

 
$
1,120.8

 
$
1,023.9

Cost of sales
 
774.6

 
817.2

 
836.8

 
807.6

 
752.8

Gross profit
 
364.3

 
347.3

 
347.9

 
313.2

 
271.1

Selling, general and administrative expenses
 
218.8

 
216.4

 
220.7

 
214.4

 
204.2

Pension settlement
 
16.6

 
0.5

 

 

 

Loss on Walter receivable
 

 
11.6

 

 

 

Other charges
 
8.3

 
9.2

 
3.1

 
1.5

 
2.8

Interest expense, net
 
23.6

 
27.6

 
49.6

 
51.7

 
59.9

Loss on early extinguishment of debt
 

 
31.3

 
1.0

 
1.4

 
1.5

Income before income taxes
 
97.0


50.7


73.5


44.2


2.7

Income tax expense
 
33.1

 
19.8

 
18.0

 
8.8

 
7.9

Income (loss) from continuing operations
 
63.9

 
30.9

 
55.5

 
35.4

 
(5.2
)
Discontinued operations(1)
 

 

 

 
5.4

 
(103.2
)
Net income (loss)
 
$
63.9

 
$
30.9

 
$
55.5

 
$
40.8

 
$
(108.4
)
Net income (loss) per basic share:
 
 
 
 
 
 
 
 
 
 
Continuing operations
 
$
0.40

 
$
0.19

 
$
0.35

 
$
0.23

 
$
(0.03
)
Discontinued operations(1)
 

 

 

 
0.03

 
(0.66
)
Net income (loss)
 
$
0.40

 
$
0.19

 
$
0.35

 
$
0.26

 
$
(0.69
)
Net income (loss) per diluted share:
 
 
 
 
 
 
 
 
 
 
Continuing operations
 
$
0.39

 
$
0.19

 
$
0.34

 
$
0.22

 
$
(0.03
)
Discontinued operations(1)
 

 

 

 
0.03

 
(0.66
)
Net income (loss)
 
$
0.39

 
$
0.19

 
$
0.34

 
$
0.25

 
$
(0.69
)
Weighted average shares outstanding:
 
 
 
 
 
 
 
 
 
 
Basic
 
161.3

 
160.5

 
159.2

 
157.7

 
156.5

Diluted
 
163.4

 
163.2

 
162.2

 
160.3

 
156.5

Balance sheet data (at September 30):
 
 
 
 
 
 
 
 
 
 
Cash and cash equivalents
 
$
195.0

 
$
113.1

 
$
161.1

 
$
123.6

 
$
83.0

Working capital
 
426.5

 
381.5

 
363.0

 
386.3

 
321.5

Property, plant and equipment, net
 
155.1

 
148.9

 
146.3

 
141.9

 
137.9

Total assets
 
1,280.6

 
1,229.8

 
1,312.5

 
1,275.9

 
1,233.2

Total debt
 
485.1

 
489.0

 
541.0

 
594.8

 
615.1

Long-term liabilities
 
675.3

 
694.0

 
716.5

 
764.6

 
833.6

Total liabilities
 
861.1

 
862.0

 
960.9

 
947.7

 
1,002.0

Total equity
 
419.5

 
367.8

 
351.6

 
328.2

 
231.2

Other data (year ended September 30):
 
 
 
 
 
 
 
 
 
 
Depreciation and amortization(2)
 
52.6

 
58.1

 
56.7

 
59.2

 
60.6

Capital expenditures(2)
 
39.4

 
37.5

 
36.9

 
36.5

 
31.4

Cash dividends declared per share
 
0.100

 
0.075

 
0.070

 
0.070

 
0.070

(1) 
In 2012, we sold U.S. Pipe. U.S. Pipe’s results of operations are classified as discontinued operations for 2013 and 2012
(2) 
Excludes discontinued operations in 2013 and 2012.

24

Table of Contents
Index to Financial Statements


Item 7.
MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
The following discussion should be read in conjunction with the consolidated financial statements and notes thereto that appear elsewhere in this annual report.
Overview
Organization
On October 3, 2005, Walter Energy acquired all outstanding shares of capital stock representing the Mueller Co. and Anvil businesses and contributed them to its U.S. Pipe business to form the Company. In June 2006, we completed an initial public offering of 28,750,000 shares of Series A common stock and in December 2006, Walter Energy distributed to its shareholders all of its equity interests in the Company, consisting of all of the Company’s outstanding shares of Series B common stock. On January 28, 2009, each share of Series B common stock was converted into one share of Series A common stock and the Series A designation was discontinued.
Unless the context indicates otherwise, whenever we refer to a particular year, we mean our fiscal year ended or ending September 30 in that particular calendar year.
Business
We expect our three primary end markets, repair and replacement of water infrastructure driven by municipal spending, new water infrastructure installation driven by residential construction and non-residential construction to grow in 2017. We expect the residential construction market to be the fastest growing, followed by municipal spending.
Mueller Co.
We estimate approximately 60% of Mueller Co.’s 2016 net sales were for repair and replacement directly related to municipal water infrastructure spending, approximately 30% were related to residential construction activity and approximately 10% were related to natural gas utilities.
Municipal spending in 2016 was relatively strong compared with the prior year and economic forecasts predict this trend will continue. According to the U.S. Bureau of Economic Analysis, state and local tax receipts for the quarter ended September 30, 2016 were up year-over-year and, according to the U.S. Department of Labor, the trailing twelve-month average consumer price index for water and sewerage rates at September 30, 2016 increased 3.8%. However, water conservation efforts, particularly in areas impacted by recent drought conditions, have resulted in lower overall receipts for some U.S. water utilities.
The year-over-year percentage change in housing starts is a key indicator of demand for Mueller Co.’s products sold in the residential construction market. In September 2016, Zelman & Associates forecasted a 7% increase in housing starts for calendar 2017 compared to the prior year. In October 2016, Blue Chip Economic Indicators forecasted an 8% increase in housing starts for calendar 2017 compared to the prior year.
We expect Mueller Co.’s net sales percentage growth in 2017 to be in the mid-single digits.
Anvil
In 2016, approximately 90% of Anvil’s net sales were generated by non-residential construction spending. Leading indicators related to non-residential construction appear to be signaling growth in this market. For example, the Blue Chip Economic Indicators forecasted a 2.7% increase in non-residential fixed investment in calendar 2017.
Sales to the oil & gas market accounted for approximately 5% of Anvil’s net sales in 2016, down from 10% in 2015. The trend in rig counts correlates with the direction of demand for Anvil’s products that are sold into this market. According to Baker Hughes Incorporated, U.S. land-based rig counts in October 2016 represented a decline of approximately 28% year-over-year. However, as of October 31, 2016, the active rig count had increased in 16 out of the previous 18 weeks, which is a positive indicator.
During the fourth quarter, we announced that we will be closing Anvil's facility in Longview, Texas, which is dedicated to the manufacturing of products sold into the oil & gas market. We will be consolidating those operations with Anvil's manufacturing facility in Houston. This move will reduce our fixed costs in the short term and we expect to realize higher conversion margins when volumes increase. We expect this consolidation will be completed by March 2017.
We expect Anvil’s net sales percentage growth in 2017 to be in the mid-single digits.

25

Table of Contents
Index to Financial Statements


Mueller Technologies
The municipal market is the key end market for the Mueller Technologies companies. These businesses are project-oriented and depend on customer adoption of their technology-based products and services. We entered 2017 with a strong backlog at Mueller Systems, especially for AMI products.
We expect Mueller Technologies’ net sales percentage growth in 2017 to be approximately15%.
Consolidated
Overall in 2017 for Mueller Water Products, we expect year-over-year net sales percentage growth in the mid-single digits with our strongest growth at Mueller Technologies. We expect higher operating income and operating margin, driven primarily by a favorable mix of our higher-margin products at Mueller Co, but with improvement across all three segments.
Results of Operations
Year Ended September 30, 2016 Compared to Year Ended September 30, 2015
 
Year ended September 30, 2016
 
Mueller Co.
 
Anvil    
 
Mueller Technologies
 
Corporate  
 
Total    
 
(in millions)
Net sales
$
715.7

 
$
338.3

 
$
84.9

 
$

 
$
1,138.9

Gross profit
$
250.7

 
$
96.4

 
$
17.2

 
$

 
$
364.3

Operating expenses:
 
 
 
 
 
 
 
 
 
Selling, general and administrative
88.4

 
67.3

 
27.4

 
35.7

 
218.8

Pension settlement
2.2

 
0.5

 

 
13.9

 
16.6

Other charges
0.8

 
1.8

 
0.9

 
4.8

 
8.3

 
91.4

 
69.6

 
28.3

 
54.4

 
243.7

Operating income (loss)
$
159.3

 
$
26.8

 
$
(11.1
)
 
$
(54.4
)
 
120.6

Interest expense, net
 
 
 
 
 
 
 
 
23.6

Income before income taxes
 
 
 
 
 
 
 
 
97.0

Income tax expense
 
 
 
 
 
 
 
 
33.1

Net income
 
 
 
 
 
 
 
 
$
63.9

 
 
 
 
 
 
 
 
 
 
 
Year ended September 30, 2015
 
Mueller Co.
 
Anvil
 
Mueller Technologies
 
Corporate
 
Total
 
(in millions)
Net sales
$
702.2

 
$
371.1

 
$
91.2

 
$

 
$
1,164.5

Gross profit
$
229.1

 
$
101.1

 
$
17.1

 
$

 
$
347.3

Operating expenses:
 
 
 
 
 
 
 
 
 
Selling, general and administrative
83.8

 
70.4

 
29.9

 
32.3

 
216.4

Loss on Walter receivable

 

 

 
11.6

 
11.6

Pension settlement
0.2

 
0.3

 

 

 
0.5

Other charges
8.2

 
0.4

 
0.1

 
0.5

 
9.2

 
92.2

 
71.1

 
30.0

 
44.4

 
237.7

Operating income (loss)
$
136.9

 
$
30.0

 
$
(12.9
)
 
$
(44.4
)
 
109.6

Interest expense, net
 
 
 
 
 
 
 
 
27.6

Loss on early extinguishment of debt
 
 
 
 
 
 
 
 
31.3

Income before income taxes
 
 
 
 
 
 
 
 
50.7

Income tax expense
 
 
 
 
 
 
 
 
19.8

Net income
 
 
 
 
 
 
 
 
$
30.9


26

Table of Contents
Index to Financial Statements


Consolidated Analysis
Net sales for 2016 declined to $1,138.9 million from $1,164.5 million in the prior year due primarily to lower shipment volumes of $17.8 million, unfavorable currency impact of $4.9 million and lower pricing.
Gross profit for 2016 of $364.3 million increased approximately 5% compared to $347.3 million in the prior year. Gross margin increased 220 basis points to 32.0% in 2016 from 29.8% in the prior year primarily due to improved raw material and other costs.
Selling, general and administrative expenses (“SG&A”) for 2016 increased to $218.8 million from $216.4 million in the prior year and increased as a percentage of net sales to 19.2% in 2016 from 18.6% in the prior year. These increases were primarily due to personnel-related costs.
In June 2016, our U.S. pension plan completed a pension benefit settlement program. Lump-sum distributions to fully settle existing obligations were offered to all vested participants who are no longer working for us and not yet receiving benefits. Approximately 75% of these participants accepted the offer. As a result, the plan disbursed $58.5 million and we recorded a non-cash pension settlement charge of $16.6 million.
We have a tax-related receivable from Walter Energy from prior to our spin-off from Walter in December 2006. Walter filed a petition for reorganization under Chapter 11 of the U.S. Bankruptcy Code in July 2015. As a result of this petition, we wrote off this receivable in 2015.
Interest expense, net declined $4.0 million in 2016 compared to the prior year due primarily to the debt refinancing we completed in November 2014, which replaced the Senior Subordinated Notes and the Senior Unsecured Notes with the lower-rate Term Loan. The components of interest expense, net are provided below.
 
2016
 
2015
 
(in millions)
Term Loan
$
20.5

 
$
17.5

7.375% Senior Subordinated Notes

 
4.0

8.75% Senior Unsecured Notes

 
2.4

Deferred financing costs amortization
1.9

 
2.0

ABL Agreement
1.1

 
1.7

Other interest expense
0.5

 
0.3

 
24.0

 
27.9

Interest income
(0.4
)
 
(0.3
)
 
$
23.6

 
$
27.6

Income tax expense increased to $33.1 million in 2016 from $19.8 million in the prior year due primarily to increased pretax income. The effective income tax rate fell to 34.1% in 2016 from 39.1% in the prior year.
Segment Analysis
Mueller Co.
Net sales for 2016 increased to $715.7 million from $702.2 million in the prior year. Net sales increased primarily due to higher shipment volumes of $18.8 million, but this was partially offset by unfavorable changes in Canadian currency exchange rates of $3.6 million and pricing. Domestic shipments of valves, hydrants and brass products increased 6.4% in 2016 compared to 2015.
Gross profit for 2016 increased to $250.7 million from $229.1 million in the prior year. Gross profit for 2016 increased primarily due to lower raw material costs, increased shipment volumes, and improved overhead absorption resulting from increased production. Gross margin increased to 35.0% for 2016 compared to 32.6% in the prior year. Gross margin improved primarily due to lower raw material costs, improved overhead absorption and more favorable product mix.
SG&A in 2016 increased to $88.4 million compared to $83.8 million in the prior year primarily due to personnel-related costs. SG&A were 12.4% and 11.9% of net sales for 2016 and 2015, respectively.

27

Table of Contents
Index to Financial Statements


In December 2014, Mueller Co. ceased operations at a foundry in Canada that primarily produced commodity municipal castings. This resulted in a loss of $7.2 million, which comprised most of the total other charges of $8.2 million recorded in 2015.
Anvil
Net sales in 2016 decreased to $338.3 million from $371.1 million in the prior year. Net sales in 2016 decreased $30.2 million due to lower shipment volumes, primarily into the oil & gas market. Pricing and the impact of changes in Canadian currency exchange rates were each slightly unfavorable as well. While overall shipment volumes were lower, Anvil did increase shipments of products into the fire protection market.
Gross profit in 2016 decreased to $96.4 million from $101.1 million in the prior year largely due to lower shipment volumes into the oil & gas market and related unfavorable product mix. Gross margin increased to 28.5% in 2016 compared to 27.2% in the prior year primarily due to manufacturing cost savings and lower raw material costs.
SG&A improved to $67.3 million in 2016 from $70.4 million in the prior year primarily due to personnel-related cost savings. SG&A increased to 19.9% of net sales for 2016 from 19.0% of net sales for 2015.
Mueller Technologies
Net sales in 2016 decreased to $84.9 million from $91.2 million in the prior year due to $6.4 million of lower shipment volumes. The decrease in sales volume was primarily due to the loss of a single customer's AMR purchases from 2015, which was partially offset by increases in sales of AMI products and mobile and fixed leak detection solutions.
Gross profit in 2016 was essentially flat at $17.2 million in 2016 compared to $17.1 million in the prior year. Gross margin increased to 20.3% in 2016 compared to 18.8% in the prior year due primarily to favorable product mix, particularly the partial replacement of AMR sales with higher-margin AMI sales.
SG&A decreased to $27.4 million in 2016 compared to $29.9 million in the prior year. SG&A decreased primarily due to personnel-related cost savings. SG&A decreased to 32.3% of net sales for 2016 from 32.8% of net sales in the prior year.
Corporate
SG&A increased to $35.7 million in 2016 from $32.3 million in the prior year primarily due to higher personnel-related expenses.

28

Table of Contents
Index to Financial Statements


Year Ended September 30, 2015 Compared to Year Ended September 30, 2014
 
Year ended September 30, 2015
 
Mueller Co.
 
Anvil    
 
Mueller Technologies
 
Corporate  
 
Total    
 
(in millions)
Net sales
$
702.2

 
$
371.1

 
$
91.2

 
$

 
$
1,164.5

Gross profit
$
229.1

 
$
101.1

 
$
17.1

 
$

 
$
347.3

Operating expenses:
 
 
 
 
 
 
 
 
 
Selling, general and administrative
83.8

 
70.4

 
29.9

 
32.3

 
216.4

Loss on Walter receivable

 

 

 
11.6

 
11.6

Pension settlement
0.2

 
0.3

 

 

 
0.5

Other charges
8.2

 
0.4

 
0.1

 
0.5

 
9.2

 
92.2

 
71.1

 
30.0

 
44.4

 
237.7

Operating income (loss)
$
136.9

 
$
30.0

 
$
(12.9
)
 
$
(44.4
)
 
109.6

Interest expense, net
 
 
 
 
 
 
 
 
27.6

Loss on early extinguishment of debt
 
 
 
 
 
 
 
 
31.3

Income before income taxes
 
 
 
 
 
 
 
 
50.7

Income tax expense
 
 
 
 
 
 
 
 
19.8

Net income
 
 
 
 
 
 
 
 
$
30.9

 
 
 
 
 
 
 
 
 
 
 
Year ended September 30, 2014
 
Mueller Co.
 
Anvil
 
Mueller Technologies
 
Corporate
 
Total
 
(in millions)
Net sales
$
679.1

 
$
401.4

 
$
104.2

 
$

 
$
1,184.7

Gross profit
$
212.1

 
$
112.9

 
$
22.9

 
$

 
$
347.9

Operating expenses:
 
 
 
 
 
 
 
 

Selling, general and administrative
83.3

 
70.7

 
27.2

 
39.5

 
220.7

Other charges
2.1

 
0.9

 
0.1

 

 
3.1

 
85.4


71.6


27.3

 
39.5


223.8

Operating income (loss)
$
126.7


$
41.3


$
(4.4
)
 
$
(39.5
)

124.1

Interest expense, net
 
 
 
 
 
 
 
 
49.6

Loss on early extinguishment of debt
 
 
 
 
 
 
 
 
1.0

Income before income taxes
 
 
 
 
 
 
 
 
73.5

Income tax expense
 
 
 
 
 
 
 
 
18.0

Net income
 
 
 
 
 
 
 
 
$
55.5

Consolidated Analysis
Net sales for 2015 declined to $1,164.5 million from $1,184.7 million in the prior year due primarily to lower shipment volumes of $16.7 million and unfavorable changes in Canadian currency exchange rates of $10.7 million offset by improved pricing of $7.2 million.
Gross profit for 2015 of $347.3 million was essentially flat compared to $347.9 million in the prior year. Gross margin increased 40 basis points to 29.8% in 2015 from 29.4% in the prior year due primarily to improved sales pricing.
SG&A for 2015 decreased to $216.9 million from $220.7 million in the prior year. SG&A as a percentage of net sales was 18.6% in both 2015 and in the prior year.
We have a tax-related receivable from Walter Energy from prior to our spin-off from Walter in December 2006. Walter filed a petition for reorganization under Chapter 11 of the U.S. Bankruptcy Code in July 2015. As a result of this petition, we recorded a provision for doubtful accounts of $11.6 million in 2015.

29

Table of Contents
Index to Financial Statements


Interest expense, net declined $22.0 million in 2015 compared to the prior year due primarily to the debt refinancing we completed in November 2014, which replaced the Senior Subordinated Notes and the Senior Unsecured Notes with the lower-rate Term Loan. Also, debt principal outstanding declined by $45.0 million due to the November 2014 refinancing. The components of interest expense, net are provided below.
 
2015
 
2014
 
(in millions)
Term Loan
$
17.5

 
$

7.375% Senior Subordinated Notes
4.0

 
30.6

8.75% Senior Unsecured Notes
2.4

 
16.0

Deferred financing costs amortization
2.0

 
2.0

ABL Agreement
1.7

 
1.2

Other interest expense
0.3

 
0.2

 
27.9

 
50.0

Interest income
(0.3
)
 
(0.4
)
 
$
27.6

 
$
49.6

The components of income tax expense are provided below.
 
2015
 
2014
 
(in millions)
Expense from income before income taxes
$
19.3

 
$
30.1

Deferred tax asset valuation allowance adjustment
0.5

 
(9.6
)
State tax rate change

 
(2.5
)
 
$
19.8

 
$
18.0

Segment Analysis
Mueller Co.
Net sales for 2015 increased to $702.2 million from $679.1 million in the prior year. Net sales increased primarily due to higher shipment volumes of $26.7 million and improved pricing of $4.2 million offset by unfavorable changes in Canadian currency exchange rates of $7.8 million. Domestic shipments excluding Henry Pratt, increased approximately $13.9 million, led primarily by an increase in valve and hydrant products. Net sales at Henry Pratt also increased by $22.4 million, led by $12.4 million shipments of plant and water treatment valves and $9.9 million of shipments from our 2014 acquisitions. These increases were partially offset by the absence of $9.4 million of prior year net sales of the Canadian municipal castings business.
Gross profit for 2015 increased to $229.1 million from $212.1 million in the prior year. Gross profit for 2015 increased primarily due to increased shipment volumes. Gross margin increased to 32.6% for 2015 compared to 31.2% in the prior year. Gross margin improved primarily due to increased shipment volumes, more favorable product mix and improved sales pricing.
SG&A in 2015 increased to $84.0 million compared to $83.3 million in the prior year. SG&A were 12.0% and 12.3% of net sales for 2015 and 2014, respectively.
During 2015, Mueller Co. ceased operations at a foundry in Canada that primarily produced commodity municipal castings. This resulted in a loss of $7.2 million, which comprised most of the total other charges of $8.2 million recorded during the year.
Anvil
Net sales in 2015 decreased to $371.1 million from $401.4 million in the prior year. Net sales in 2015 decreased $30.5 million due to lower shipment volumes into the oil & gas market being only slightly offset by shipment volume growth in Anvil's other markets and $2.8 million due to unfavorable changes in Canadian currency exchange rates, offset by increased pricing of $3.0 million.
Gross profit in 2015 decreased to $101.1 million from $112.9 million in the prior year. Gross margin declined to 27.2% in 2015 compared to 28.1% in the prior year largely due to unfavorable product mix with the decline of shipments into the oil & gas market.

30

Table of Contents
Index to Financial Statements


SG&A stayed flat at $70.7 million in 2015 compared to the prior year. SG&A increased to 19.1% of net sales for 2015 from 17.6% of net sales for 2014. SG&A in 2014 included a $2.5 million gain from the sale of certain of Anvil’s Bloomington, Minnesota assets.
Mueller Technologies
Net sales in 2015 decreased to $91.2 million from $104.2 million in the prior year due to $12.9 million of lower shipment volumes. The Mueller Technologies businesses are more project-oriented and the decrease in net sales was primarily due to fewer large projects that specified AMI metering systems.
Gross profit in 2015 decreased to $17.1 million from $22.9 million in the prior year. Gross margin declined to 18.8% in 2015 compared to 22.0% in the prior year due primarily to product mix.
SG&A increased to $29.9 million in 2015 compared to $27.2 million in the prior year. SG&A increased primarily due to additional research and development investments in Echologics and expanding the number of sales and customer service representatives. SG&A increased to 32.8% of net sales for 2015 from 26.1% of net sales in the prior year.
Corporate
SG&A decreased to $32.3 million in 2015 from $39.5 million in the prior year primarily due to lower personnel-related expenses.
Financial Condition
Cash and cash equivalents were $195.0 million at September 30, 2016 compared to $113.1 million at September 30, 2015. Cash and cash equivalents increased during 2016 as a result of cash provided by operating activities of $145.1 million, which was partially offset by cash used in investing activities of $39.1 million, primarily capital expenditures, and cash used in financing activities of $23.7 million, primarily dividend payments. Cash and cash equivalents also decreased by $0.4 million during 2016 due to changes in currency exchange rates.
Receivables, net were $186.7 million at September 30, 2016 compared to $175.3 million at September 30, 2015. Receivables at September 30, 2016 and September 30, 2015 represented approximately 56 and 51 days net sales, respectively.
Inventories were $213.8 million at September 30, 2016 compared to $219.1 million at September 30, 2015. Inventories decreased during 2016 due primarily to lower raw material costs. Estimated inventory turns in 2016 were slightly faster than in 2015.
Property, plant and equipment, net was $155.1 million at September 30, 2016 compared to $148.9 million at September 30, 2015, and depreciation expense was $28.3 million in 2016 compared to $28.7 million in 2015. Capital expenditures, including external-use software development costs capitalized, were $39.4 million in 2016.
Intangible assets were $486.0 million at September 30, 2016 compared to $507.3 million at September 30, 2015. Finite-lived intangible assets, $181.0 million of net book value at September 30, 2016, are amortized over their estimated useful lives. This amortization expense was $24.3 million during 2016 and is expected to be $20 million to $25 million for each of the next five years. Indefinite-lived intangible assets, $305.0 million at September 30, 2016, are not amortized, but tested at least annually for possible impairment.
Accounts payable and other current liabilities were $179.9 million at September 30, 2016 compared to $161.9 million at September 30, 2015. Increased payables relate primarily to the timing of related disbursements.
Net outstanding borrowings were $485.1 million at September 30, 2016 compared to $489.0 million at September 30, 2015.
Deferred income taxes were net liabilities of $108.8 million at September 30, 2016 compared to net liabilities of $117.0 million at September 30, 2015. The $8.2 million decrease in the net liability was primarily related to an increased deferred tax asset related to the 2016 pension settlement. Deferred tax liabilities related to intangible assets and other were $180.8 million and $183.1 million at September 30, 2016 and 2015, respectively.

31

Table of Contents
Index to Financial Statements


Liquidity and Capital Resources
We refinanced our debt on November 25, 2014 by repaying all of our Senior Subordinated Notes and Senior Unsecured Notes and entering into a $500.0 million term loan that matures on November 25, 2021.
We had cash and cash equivalents of $195.0 million at September 30, 2016 and approximately $169 million of additional borrowing capacity under our ABL Agreement based on September 30, 2016 data. Undistributed earnings from our subsidiaries in Canada and China are considered to be permanently invested outside of the United States. At September 30, 2016, cash and cash equivalents included $18.6 million and $6.4 million in Canada and China, respectively.
In 2014, we used $10.0 million to acquire certain assets of Lined Valve Company Inc., and in 2015 we received cash of $0.3 million for an adjustment to that purchase price.
Cash flows from operating activities are categorized below.
 
2016
 
2015
 
(in millions)
Collections from customers
$
1,127.9

 
$
1,168.1

Disbursements, other than interest and income taxes
(924.8
)
 
(1,030.2
)
Interest payments, net
(21.1
)
 
(36.8
)
Income tax payments, net
(36.9
)
 
(13.3
)
Cash provided by operating activities
$
145.1

 
$
87.8

Decreased disbursements, other than interest and income taxes, during 2016 reflect timing differences of purchases and disbursements.
Capital expenditures were $39.4 million during 2016 compared to $37.5 million during 2015. We estimate 2017 capital expenditures will be $40 million to $44 million.
We were not required to make, and we did not make, any contributions to our U.S. pension plan in 2016. The proportion of the assets held by our U.S. pension plan invested in fixed income securities, instead of equity securities, has increased over historical levels. Because of this shift in the strategic asset allocation, the estimated rate of return on pension plan assets has decreased, which could ultimately cause our pension expense and our required contributions to this plan to increase.
Income tax payments were higher during 2016 compared to the prior year because we fully utilized our net operating loss carryforwards for U.S. federal income taxes during 2015. Tax payments in 2015 were impacted by certain non-recurring expenses, primarily a $31.3 million loss on early extinguishment of debt, an $11.6 million loss on the receivable from Walter Energy and $9.2 million of other charges, as well as the use of our remaining U.S. federal operating loss carryforwards. We expect effective tax rate in 2017 to increase slightly over the 2016 effective rate.
On April 28, 2015, we announced the authorization of a stock repurchase program for up to $50.0 million of our common stock. The program does not commit us to any particular timing or quantity of purchases, and we may suspend or discontinue the program at any time. In May 2015, we acquired 523,851 shares of our common stock through open market purchases.  At September 30, 2016, we had remaining authorization of $45.0 million to repurchase shares of our common stock.
We anticipate our existing cash, cash equivalents and borrowing capacity combined with our expected operating cash flows will be sufficient to meet our anticipated operating expenses, capital expenditures and debt service obligations as they become due through September 30, 2017. However, our ability to make these payments will depend partly upon our future operating performance, which will be affected by general economic, financial, competitive, legislative, regulatory, business and other factors beyond our control.
ABL Agreement
At September 30, 2016, the ABL Agreement consisted of a revolving credit facility for up to $225 million of revolving credit borrowings, swing line loans and letters of credit. The ABL Agreement permits us to increase the size of the credit facility by an additional $150 million in certain circumstances subject to adequate borrowing base availability. We may borrow up to $25 million through swing line loans and may have up to $60 million of letters of credit outstanding.
Borrowings under the ABL Agreement bear interest at a floating rate equal to LIBOR plus a margin ranging from 125 to 150 basis points, or a base rate, as defined in the ABL Agreement, plus a margin ranging from 25 to 50 basis points. At September 30, 2016, the applicable LIBOR-based margin was 125 basis points.

32

Table of Contents
Index to Financial Statements


The ABL Agreement terminates on July 13, 2021. We pay a commitment fee for any unused borrowing capacity under the ABL Agreement of 25 basis points per annum.
The ABL Agreement is subject to mandatory prepayments if total outstanding borrowings under the ABL Agreement are greater than the aggregate commitments under the revolving credit facility or if we dispose of overdue accounts receivable in certain circumstances. The borrowing base under the ABL Agreement is equal to the sum of (a) 85% of the value of eligible accounts receivable and (b) the lesser of (i) 70% of the value of eligible inventory or (ii) 85% of the net orderly liquidation value of the value of eligible inventory, less certain reserves. Prepayments can be made at any time with no penalty.
Substantially all of our U.S. subsidiaries are borrowers under the ABL Agreement and are jointly and severally liable for any outstanding borrowings. Our obligations under the ABL Agreement are secured by a first-priority perfected lien on all of our U.S. inventory, accounts receivable, certain cash and other supporting obligations.
Borrowings are not subject to any financial maintenance covenants unless excess availability is less than the greater of $17.5 million and 10% of the Loan Cap as defined in the ABL Agreement. The ABL Agreement contains customary negative covenants and restrictions on our ability to engage in specified activities, such as:
limitations on other debt, liens, investments and guarantees;
restrictions on dividends and redemptions of our capital stock and prepayments and redemptions of debt; and
restrictions on mergers and acquisition, sales of assets and transactions with affiliates.
Term Loan
We had $491.2 million face value outstanding under the Term Loan at September 30, 2016. Term Loan borrowings accrue interest at a floating rate equal to LIBOR, subject to a floor of 0.75%, plus 325 basis points. We may voluntarily repay amounts borrowed under the Term Loan at any time. The principal amount of the Term Loan is required to be repaid in quarterly installments of $1.25 million. The Term Loan matures on November 25, 2021. The Term Loan is guaranteed by substantially all of our U.S. subsidiaries and secured by essentially all of our assets, although the ABL Agreement has a senior claim on certain collateral securing borrowings thereunder.
As described more fully in Note 6. of the Notes to Consolidated Financial Statements, we entered into interest rate swap contracts in April 2015 that hedge interest payments on $150 million of our Term Loan borrowings starting on September 30, 2016.
Our corporate credit rating and the credit rating for our debt are presented below.
 
Moody’s  
 
Standard & Poor’s
 
September 30,
 
September 30,
 
2016
 
2015
 
2016
 
2015
Corporate credit rating
Ba3
 
B1
 
BB-
 
BB-
ABL Agreement
Not rated
 
Not rated
 
Not rated
 
Not rated
Term Loan
Ba3
 
B2
 
BB
 
BB
Outlook
Stable
 
Stable
 
Stable
 
Stable
Off-Balance Sheet Arrangements
We do not have any relationships with unconsolidated entities or financial partnerships, such as entities often referred to as structured finance or special purpose entities, which would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes. In addition, we do not have any undisclosed borrowings or debt or any derivative contracts other than those described in “Item 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURE ABOUT MARKET RISK” or synthetic leases. Therefore, we are not exposed to any financing, liquidity, market or credit risk that could have arisen had we engaged in such relationships.
We use letters of credit and surety bonds in the ordinary course of business to ensure the performance of contractual obligations. At September 30, 2016, we had $22.9 million of letters of credit and $41.0 million of surety bonds outstanding.

33

Table of Contents
Index to Financial Statements


Contractual Obligations
Our contractual obligations at September 30, 2016 are presented below.
 
2017
 
2018-2019
 
2020-2021
 
After 2021
 
Total    
 
(in millions)
Debt:
 
 
 
 
 
 
 
 
 
Principal payments(1)
$
5.9

 
$
11.0

 
$
10.1

 
$
466.2

 
$
493.2

Interest(2)
22.4

 
44.2

 
43.2

 
3.2

 
113.0

Operating leases
7.1

 
8.1

 
4.1

 
5.1

 
24.4

Unconditional purchase obligations(3)
56.3

 
3.5

 

 

 
59.8

Other current liabilities(4)
1.3

 

 

 

 
1.3

 
$
93.0

 
$
66.8

 
$
57.4

 
$
474.5

 
$
691.7

(1) 
The long-term debt balance at September 30, 2016 is net of $1.8 million of unamortized discount on the term loan.
(2) 
Excludes payment of interest associated with interest rate swap contracts.
(3) 
Includes contractual obligations for purchases of raw materials and capital expenditures.
(4) 
Consists of obligations for required pension contributions. Actual payments may differ. We have not estimated required pension contributions beyond 2017.
Effect of Inflation
We experience changing price levels primarily related to purchased components and raw materials. Mueller Co. experienced a 18% decrease in the average cost per ton of scrap steel and a 23% decrease in the average cost of brass ingot purchased in 2016 compared to 2015.  Anvil experienced a 24% decrease in the average cost per ton of scrap steel purchased in 2016 compared to 2015. Changes in prices for purchased parts, freight, warehousing, labor, and other factors tended to offset these changes during 2016. The Mueller Technologies businesses are not significantly impacted by fluctuations in commodity prices.
Seasonality
Our water infrastructure business depends on construction activity, which is seasonal in many areas due to the impact of cold weather conditions on construction. Net sales and operating income have historically been lowest in the quarters ending December 31 and March 31 when the northern United States and all of Canada generally face weather conditions that restrict significant construction and other field crew activity. For Mueller Co., approximately 45% of a fiscal year’s net sales occurs in the first half of the fiscal year with 55% occurring in the second half of the fiscal year. See “Item 1A. RISK FACTORS-Seasonal demand for certain of our products and services may adversely affect our financial results.”
Critical Accounting Estimates
The preparation of financial statements in accordance with accounting principles generally accepted in the United States requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues, expenses and related disclosure of contingent assets and liabilities. These estimates are based upon experience and on various other assumptions we believe to be reasonable under the circumstances. Actual results may differ from these estimates. We consider an accounting estimate to be critical if changes in the estimate that are reasonably likely to occur over time or the use of reasonably different estimates could have a material impact on our financial condition or results of operations. We consider the accounting topics presented below to include our critical accounting estimates.
Revenue Recognition
We recognize revenue when delivery of a product or performance of a service has occurred and there is persuasive evidence of a sales arrangement, sales prices are fixed and determinable and collectability from the customers is reasonably assured. Sales are recorded net of estimated discounts, returns and rebates. Discounts, returns and rebates are estimated based upon current offered sales terms and historical return and allowance rates.

34

Table of Contents
Index to Financial Statements


Receivables
The estimated allowance for doubtful receivables is based upon judgments and estimates of expected losses and specific identification of problem accounts. Significantly weaker than anticipated industry or economic conditions could impact customers’ ability to pay such that actual losses may be greater than the amounts provided for in this allowance. The periodic evaluation of the adequacy of the allowance for doubtful receivables is based on an analysis of prior collection experience, specific customer creditworthiness and current economic trends within the industries served. In circumstances where a specific customer’s inability to meet its financial obligation is known to us (e.g., bankruptcy filings or substantial downgrading of credit ratings), we record a specific allowance to reduce the receivable to the amount we reasonably believe will be collected.
Inventories
We record inventories at the lower of first-in, first-out method cost or estimated net realizable value. Inventory cost includes an overhead component that can be affected by levels of production and actual costs incurred. We evaluate the need to record adjustments for impairment of inventory at least quarterly. This evaluation includes such factors as anticipated usage, inventory levels and ultimate product sales value. Inventory that, in the judgment of management, is obsolete or in excess of our normal usage is written-down to its estimated market value, if less than its cost. Significant judgments must be made when establishing the allowance for obsolete and excess inventory.
Income Taxes
We recognize deferred tax liabilities and deferred tax assets for the expected future tax consequences of events that have been included in the financial statements or tax returns. Deferred tax liabilities and assets are determined based on the differences between the financial statements and the tax basis of assets and liabilities, using enacted tax rates in effect for the years in which the differences are expected to reverse. A valuation allowance is provided to offset any net deferred tax assets when, based upon the available evidence, it is more likely than not that some or all of the deferred tax assets will not be realized. Our tax balances are based on our expectations of future operating performance, reversal of taxable temporary differences, tax planning strategies, interpretation of the tax regulations currently enacted and rulings in numerous tax jurisdictions.
We only record tax benefits for positions that we believe are more likely than not of being sustained under audit examination based solely on the technical merits of the associated tax position. The amount of tax benefit recognized for any position that meets the more likely than not threshold is the largest amount of the tax benefit that we believe is greater than 50% likely of being realized.
Accounting for the Impairment of Long-Lived Assets Including Goodwill and Other Intangible Assets
We test indefinite-lived intangible assets for impairment annually (or more frequently if events or circumstances indicate possible impairment). We performed this annual impairment testing at September 1, and concluded that our indefinite-lived intangible assets were not impaired. We tested the indefinite-lived intangible assets for impairment using a “royalty savings method,” which is a variation of the discounted cash flow method. This method estimates a fair value by calculating an estimated discounted future cash flow stream from the hypothetical licensing of the indefinite-lived intangible assets. If this estimated fair value exceeds the carrying value, no impairment is indicated. This analysis is dependent on management’s best estimates of future operating results and the selection of reasonable discount rates and hypothetical royalty rates. Significantly different projected operating results could result in a different conclusion regarding impairment. Standard valuation methodologies using rates considered reasonable by management have not indicated an impairment.
Other long-lived assets, including finite-lived intangible assets, are amortized over their respective estimated useful lives and reviewed for impairment if events or circumstances indicate possible impairment.

35

Table of Contents
Index to Financial Statements


Contingencies
We are involved in litigation, investigations and claims arising out of the normal conduct of our business. We estimate and accrue liabilities resulting from such matters based on a variety of factors, including outstanding legal claims and proposed settlements; assessments by counsel of pending or threatened litigation; and assessments of potential environmental liabilities and remediation costs. We believe we have adequately accrued for these potential liabilities; however, facts and circumstances may change and could cause the actual liability to exceed the estimates, or may require adjustments to the recorded liability balances in the future. As we learn new facts concerning contingencies, we reassess our position both with respect to accrued liabilities and other potential exposures. Estimates particularly sensitive to future changes include liabilities recorded for environmental remediation, tax and legal matters. Estimated future environmental remediation costs are subject to change due to such factors as the uncertain magnitude of cleanup costs, the unknown time and extent of such remedial actions that may be required, and the determination of our liability in proportion to that of other responsible parties. Estimated future costs related to tax and legal matters are subject to change as events evolve and as additional information becomes available during the administrative and litigation processes. For more information on these and other contingencies, see Note 16. of the Notes to Consolidated Financial Statements. See also “Item 1. BUSINESS - Regulatory and Environmental Matters,” “Item 1A. RISK FACTORS” and “Item 3. LEGAL PROCEEDINGS”
Workers Compensation, Defined Benefit Pension Plans, Environmental and Other Long-term Liabilities
We are obligated for various liabilities that will ultimately be determined over what could be a very long future time period. We established the recorded liabilities for such items at September 30, 2016 using estimates for when such amounts will be paid and what the amounts of such payments will be. These estimates are subject to change based on numerous factors, including among others, regulatory changes, technology changes, the investment performance of related assets, longevity of participants, the discount rate used and changes to plan designs.
Item 7A.
QUANTITATIVE AND QUALITATIVE DISCLOSURE ABOUT MARKET RISK
We are exposed to various market risks, including potential losses arising from adverse changes in market prices and rates, such as various commodity prices, interest rates and foreign exchange rates. We do not enter into derivatives or other financial instruments for trading or speculative purposes.
Our primary financial instruments are cash and cash equivalents. This includes cash in banks and highly rated, liquid money market investments. We believe those instruments are not subject to material potential near-term losses in future earnings from reasonably possible near-term changes in market rates or prices.
Commodity Price Risk
Our products are made using various purchased components and several basic raw materials, including scrap steel, sand, resin, brass ingot and steel pipe. We expect prices for these items to fluctuate based on marketplace demand and our product margins and level of profitability may fluctuate if we do not pass changes in purchased component and raw material costs on to our customers.
Mueller Co. experienced a 18% decrease in the average cost per ton of scrap steel and a 23% decrease in the average cost of brass ingot purchased in 2016 compared to 2015.  Anvil experienced a 24% decrease in the average cost per ton of scrap steel purchased in 2016 compared to 2015. Changes in prices for purchased parts, freight, warehousing, labor, and other factors tended to offset these changes during 2016. See “Item 1A. RISK FACTORS-The prices of our purchased components and raw materials can be volatile.”
Interest Rate Risk
At September 30, 2016, we have variable rate debt with a face value of $491.2 million. To the extent LIBOR is above our Term Loan’s rate floor of 0.75%, the impact on pre-tax earnings or cash flows resulting from a 100 basis point increase in interest rates on variable rate debt, holding other variables constant, would be approximately $5 million per year. Our interest rate swap contracts described more fully in Note 7. of the Notes to Consolidated Financial Statements reduce this annual hypothetical exposure by approximately $1.5 million during 2017-2021.

36

Table of Contents
Index to Financial Statements


Currency Risk
Our principal assets, liabilities and operations outside the U.S. are in Canada, China and Australia. These assets and liabilities are translated into U.S. dollars at currency exchange rates in effect at the end of each period, with the effect of such translation reflected in other comprehensive loss. Our stockholders’ equity will fluctuate depending upon the weakening or strengthening of the U.S. dollar against these non-U.S. currencies. Net sales and expenses of these subsidiaries are translated into U.S. dollars at the average currency exchange rate during the period. At September 30, 2016, $52.8 million of our net assets were denominated in non-U.S. currencies.
Item 8.
FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
The Reports of Independent Registered Public Accounting Firm, Consolidated Financial Statements and the accompanying Notes to Consolidated Financial Statements that are filed as part of this annual report are listed under “Item 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES” and are set forth beginning on page F-1 .
Selected quarterly financial data for 2016 and 2015 are provided in Note 18. of the Notes to Consolidated Financial Statements.
Item 9A.
CONTROLS AND PROCEDURES
Evaluation of Disclosure Controls and Procedures
We maintain disclosure controls and procedures that are designed to ensure that information required to be disclosed in the reports we file or submit under the Securities Exchange Act of 1934, as amended (the “Exchange Act”) is recorded, processed, summarized and reported within the time periods specified in the rules and forms of the Securities and Exchange Commission and that such information is accumulated and communicated to our management, including the Chief Executive Officer and the Chief Financial Officer as appropriate, to allow timely decisions regarding required disclosure.
Our Chief Executive Officer and Chief Financial Officer evaluated the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) of the Exchange Act) as of the end of the period covered by this annual report. Based on this evaluation, those officers have concluded that, at September 30, 2016, our disclosure controls and procedures were effective.
Changes in Internal Control over Financial Reporting
There were no changes in internal control over financial reporting during the quarter ended September 30, 2016 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.
Management’s Report on Internal Control over Financial Reporting
Management is responsible for establishing and maintaining adequate internal control over financial reporting (as defined in Rule 13a-15(f) of the Exchange Act). Internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
We assessed the effectiveness of our internal control over financial reporting at September 30, 2016. In making this assessment, we used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission in Internal Control - Integrated Framework (2013 framework). After doing so, management concluded that, at September 30, 2016, our internal control over financial reporting was effective.
The effectiveness of our internal control over financial reporting at September 30, 2016 has been audited by Ernst & Young LLP, an independent registered public accounting firm, as stated in their report which is included in this annual report.

37

Table of Contents
Index to Financial Statements


PART III
Item 10.
DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE
The name, age at November 15, 2016 and position of each of our current executive officers and directors are presented below.
Name
 
Age
 
Position
Gregory E. Hyland
 
65

 
Chairman of the board of directors, President and Chief Executive Officer
Keith L. Belknap
 
58

 
Senior Vice President, General Counsel, Chief Compliance Officer and Corporate Secretary; President of Mueller Technologies
Patrick M. Donovan
 
57

 
President, Anvil
Evan L. Hart
 
51

 
Senior Vice President and Chief Financial Officer
Robert P. Keefe
 
62

 
Senior Vice President and Chief Technology Officer
Kevin G. McHugh
 
58

 
Vice President and Controller
Gregory S. Rogowski
 
57

 
President, Mueller Co.
Marietta Edmunds Zakas
 
57

 
Senior Vice President, Strategy, Corporate Development and Communications
Shirley C. Franklin
 
71

 
Director
Thomas J. Hansen
 
67

 
Director
Jerry W. Kolb
 
80

 
Director
Joseph B. Leonard
 
73

 
Director
Mark J. O’Brien
 
73

 
Director
Bernard G. Rethore
 
75

 
Director
Lydia W. Thomas
 
72

 
Director
Michael T. Tokarz
 
67

 
Director
Gregory E. Hyland has been Chairman of the board of directors since October 2005 and President and Chief Executive Officer since January 2006. Mr. Hyland was Chairman, President and Chief Executive Officer of Walter Energy, a homebuilding, financial services and natural resources company, from September 2005 to December 2006. Prior to that time, he was President, U.S. Fleet Management Solutions of Ryder System, Inc. (“Ryder”), a transportation and logistics company, from June 2005 to September 2005. Mr. Hyland was Executive Vice President, U.S. Fleet Management Solutions of Ryder from October 2004 to June 2005. He earned Bachelor and Master of Business Administration degrees from the University of Pittsburgh.
Keith L. Belknap has been our Senior Vice President, General Counsel and Corporate Secretary since April 2012, our Chief Compliance Officer since October 2012 and President of Mueller Technologies since July 2015. Previously, Mr. Belknap was Senior Vice President, General Counsel and Corporate Secretary of PRIMEDIA, Inc., a digital media and real estate advertising company, since 2007. Prior to that time, he held senior legal positions with PPG Industries, a supplier of paint, coating, optical product, specialty material, chemical, glass and fiberglass, and Georgia-Pacific Corporation, a manufacturer and marketer of tissue, packaging, paper, pulp and building products. Mr. Belknap earned a Bachelor of Arts degree with honors from the University of Tulsa (Phi Beta Kappa) and a Juris Doctor with honors from Harvard Law School.
Patrick M. Donovan has been President of our Anvil segment since May 2016. Previously, Mr. Donovan was president of MIC Group, a division of J.B. Poindexter, Inc., a diversified manufacturer of industrial products since 2012. Prior to that time, Mr. Donovan was with Parker Hannifin Corporation, where he led two of its divisions, including its refrigeration and air conditioning valves and controls, and industrial seals businesses.  Mr. Donovan earned a Bachelor degree in Organizational Behavior and Management from Brown University and a Master of Business Administration degree from the University of Chicago Booth School of Business.
Evan L. Hart has been our Senior Vice President and Chief Financial Officer since July 2008. Mr. Hart was our Controller from December 2007 to July 2008 and our Vice President of Financial Planning and Analysis from September 2006 to December 2007. Previously, he was Vice President, Controller and Treasurer for Unisource Worldwide, Inc., a marketer and distributor of commercial printing and business imaging papers, packaging systems and facility supplies and equipment from 2002 to 2006. Mr. Hart earned a Bachelor of Science degree from Birmingham-Southern College and is a certified public accountant.

38

Table of Contents
Index to Financial Statements


Robert P. Keefe has been our Senior Vice President and Chief Technology Officer since December 2011 and our Senior Vice President and Chief Information Officer since March 2007. Previously, Mr. Keefe was Corporate Vice President and Chief Information Officer at Russell Corporation, an athletic apparel, footwear and equipment company. He is a director of the Society for Information Management, International, a non-profit trade organization. Mr. Keefe earned a Bachelor degree from the State University of New York at Oswego and a Master of Business Administration degree from Pace University.
Kevin G. McHugh has been our Vice President and Controller since July 2008. Mr. McHugh was our Vice President, Financial Reporting from January 2008 to July 2008. Previously, he was Corporate Controller at Unisource Worldwide, Inc. from 2003 to 2007. Mr. McHugh earned a Bachelor of Business Administration degree with honors from the University of Notre Dame and is a certified public accountant.
Gregory S. Rogowski has been President of our Mueller Co. segment since May 2009. Previously, Mr. Rogowski was President and/or Chief Executive Officer of Performance Fibers, Inc., a polyester industrial fibers business from 2004 to 2009. He earned a Bachelor of Science degree from Virginia Polytechnic Institute and State University, a Master of Science degree from the University of Akron and a Master of Business Administration degree from the University of Richmond.
Marietta Edmunds Zakas has been our Senior Vice President, Strategy, Corporate Development and Communications since November 2006. She has also been the interim head of Human Resources since January 2016. Previously, Ms. Zakas held various positions at Russell Corporation, culminating in her role as Corporate Vice President, Chief of Staff, Business Development and Treasurer. She earned a Bachelor of Arts degree with honors from Randolph-Macon Woman’s College (now known as Randolph College), a Master of Business Administration degree from the University of Virginia Darden School of Business and a Juris Doctor from the University of Virginia School of Law. Ms. Zakas is a director of Atlantic Capital Bank and Atlantic Capital Bancshares.
Shirley C. Franklin has been a member of our board of directors since November 2010. Ms. Franklin is the Barbara Jordan visiting professor at the LBJ School of the University of Texas and the Executive Chair of the board of directors of Purpose Built Communities, Inc., a national non-profit organization established to transform struggling neighborhoods into sustainable communities. She also is Co-Chair of the Atlanta Regional Commission on Homelessness and Chair of the board of directors of the National Center for Civil and Human Rights.  From 2002 to 2010, Ms. Franklin was mayor of Atlanta, Georgia. She is a director of Delta Air Lines, Inc., a provider of air transportation for passengers and cargo. Ms. Franklin earned a Bachelor of Science degree in sociology from Howard University and a Master’s degree in sociology from the University of Pennsylvania.
Thomas J. Hansen has been a member of our board of directors since October 2011.  Until 2012, Mr. Hansen was Vice Chairman of Illinois Tool Works Inc. (“ITW”), a manufacturer of fasteners and components, consumable systems and a variety of specialty products and equipment. He joined ITW in 1980 as sales and marketing manager of the Shakeproof Industrial Products businesses.  From 1998 until May 2006, Mr. Hansen was Executive Vice President of ITW.  He is a director of Terex Corporation, a diversified global manufacturer of a variety of machinery products, and Standex International Corporation, a manufacturer of products and services for diverse industrial market segments.  Mr. Hansen earned a Bachelor of Science degree in marketing from Northern Illinois University and a Master of Business Administration degree from Governors State University.
Jerry W. Kolb has been a member of our board of directors since April 2006. Mr. Kolb was a director of Walter Energy from 2003 until 2016. He was a Vice Chairman of Deloitte & Touche LLP, a registered public accounting firm, from 1986 to 1998. Mr. Kolb earned a Bachelor of Science degree in accountancy from the University of Illinois and Master of Business Administration degree in finance from DePaul University. Mr. Kolb is a certified public accountant.
Joseph B. Leonard has been a member of our board of directors since April 2006. Mr. Leonard was a director of Walter Energy from 2005 to 2007 and from 2009 until 2016. He was Interim Chief Executive Officer of Walter Energy from March 2010 through March 2011 and from August 2011 to September 2011. Mr. Leonard was Chairman of AirTran Holdings, Inc., a full service airline company, from November 2007 to June 2008, Chairman and Chief Executive Officer of AirTran Holdings, Inc. from January 1999 to November 2007 and President of AirTran Holdings, Inc. from January 1999 to January 2001. He is a director of Air Canada, a full service airline company. Mr. Leonard earned a Bachelor of Science degree in aerospace engineering from Auburn University.

39

Table of Contents
Index to Financial Statements


Mark J. O’Brien has been a member of our board of directors since April 2006. He serves as Chairman of Walter Investment Management Corp. (formerly Walter Energy’s financing business), and from 2009 to October 2015 he served as Chief Executive Officer of the company. Mr. O’Brien has been President and Chief Executive Officer of Brier Patch Capital and Management, Inc., a real estate investment firm, since September 2004. He held various executive positions at Pulte Homes, Inc., a home building company, for 21 years, retiring as President and Chief Executive Officer in June 2003. Mr. O’Brien earned a Bachelor of Arts degree in history from the University of Miami.
Bernard G. Rethore has been a member of our board of directors since April 2006. He was a director of Walter Energy from 2002 until 2016. Mr. Rethore has been Chairman of the Board Emeritus of Flowserve Corporation, a manufacturer of pumps, valves, seals and components, since April 2000. From January 2000 to April 2000, he was Flowserve’s Chairman. Mr. Rethore had previously served as its Chairman, President and Chief Executive Officer. He had been a director of Belden, Inc., a manufacturer of specialty signal-transmission products, from 1997 until May 2012. Mr. Rethore is a director of Dover Corp., a diversified manufacturer of a wide range of proprietary products. In 2008, he was honored by the Outstanding Directors Exchange as an Outstanding Director of the Year and in 2012, he was designated a Board Leadership Fellow by the National Association of Corporate Directors. Mr. Rethore earned a Bachelor of Arts degree in Economics (Honors) from Yale University and a Master of Business Administration degree from the Wharton School of the University of Pennsylvania, where he was a Joseph P. Wharton Scholar and Fellow.
Lydia W. Thomas has been a member of our board of directors since January 2008. Dr. Thomas was President and Chief Executive Officer of Noblis, Inc., a public interest research and development company, from 1996 to 2007. She was previously with The MITRE Corporation, Center for Environment, Resources and Space, serving as Senior Vice President and General Manager from 1992 to 1996, Vice President from 1989 to 1992 and Technical Director from 1982 to 1989. Dr. Thomas is a director of Cabot Corporation, a global performance materials company. In 2013, she was honored by the outstanding Directors Exchange as an outstanding Director of the Year. Dr. Thomas earned a Bachelor of Science degree in zoology from Howard University, a Master of Science degree in microbiology from American University and a Doctor of Philosophy degree in cytology from Howard University.
Michael T. Tokarz has been a member of our board of directors since April 2006. Mr. Tokarz served as non-executive Chairman of the Board of Walter Energy from 2006 until 2016. Since February 2002, he has been a member of the Tokarz Group, LLC, an investment company. From January 1996 until February 2002, Mr. Tokarz was a member of the limited liability company that serves as the general partner of Kohlberg Kravis Roberts & Co. L.P., a private equity company. He is a director of CNO Financial Group, Inc. (formerly Conseco, Inc.), an insurance provider, MVC Capital, Inc., a registered investment company and Walter Investment Management Corp. Until February 2015, he served as a director of IDEX Corporation and until January 2014 he served as a director of Dakota Growers Pasta Company. In 2007, he was honored by the Outstanding Directors Exchange as an Outstanding Director of the Year. Mr. Tokarz earned a Bachelor of Arts degree in economics with high distinction and a Master of Business Administration degree in finance from the University of Illinois.
Additional Information
Additional information required by this item will be contained in our definitive proxy statement issued in connection with the 2017 Annual Meeting of Stockholders filed with the SEC within 120 days after September 30, 2016 and is incorporated herein by reference.
Our website address is www.muellerwaterproducts.com. You may read and print our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and all amendments to those reports from the investor relations section of our website free of charge. These reports are available on our website soon after we file them with or furnish them to the SEC. These reports should also be available through the SEC’s website at www.sec.gov.
We have adopted a written code of conduct that applies to all directors, officers and employees, including a separate code that applies only to our principal executive officer and senior financial officers in accordance with Section 406 of the Sarbanes-Oxley Act of 2002 and the rules of the SEC promulgated thereunder. Our Code of Business Conduct and Ethics is available in the corporate governance section of our website. In the event that we make changes in, or provide waivers from, the provisions of this Code of Business Conduct and Ethics that the SEC requires us to disclose, we will disclose these events in the corporate governance section of our website.
We have adopted corporate governance guidelines. The guidelines and the charters of our board committees are available in the corporate governance section of our website. Copies of the Code of Business Conduct and Ethics, corporate governance guidelines and board committee charters are also available in print upon written request to the Corporate Secretary, Mueller Water Products, Inc., 1200 Abernathy Road N.E., Suite 1200, Atlanta, GA 30328.

40

Table of Contents
Index to Financial Statements


Item 11.
EXECUTIVE COMPENSATION
The information required by this item will be contained in our definitive proxy statement issued in connection with the 2017 Annual Meeting of Stockholders and is incorporated herein by reference.
Item 12.
SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
Except for the information set forth below and the information set forth in “Part II, Item 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES,” the information required by this item will be contained in our definitive proxy statement issued in connection with the 2017 Annual Meeting of Stockholders and is incorporated herein by reference.
Securities Authorized for Issuance under Equity Compensation Plans
We have two compensation plans under which our equity securities are authorized for issuance. The Mueller Water Products, Inc. 2006 Employee Stock Purchase Plan (“ESPP”) was approved by our sole stockholder in May 2006 and amended by our stockholders in February 2016. The Mueller Water Products, Inc. 2006 Stock Incentive Plan (“2006 Plan”) was approved by our sole stockholder in May 2006 and amended by our stockholders in January 2008, January 2009 and January 2012.
The following table sets forth certain information relating to these equity compensation plans at September 30, 2016.
 
Number of securities
to be issued
upon exercise of
outstanding options,
warrants and rights
 
Weighted average
exercise price of
outstanding options,
warrants and rights
 
Number of securities
remaining available
for future issuance
Equity compensation plans approved by stockholders:
 
 
 
 
 
 
 
 
2006 Plan
5,066,821

(1) 
 
$
5.99

(2) 
 
7,319,621

(3) 
ESPP
39,231

  
 

 
 
3,051,778

(4) 
Total
5,106,052

  
 
 
 
 
10,371,399

  
Equity compensation plans not approved by stockholders

  
 
$

 
 

  
(1)
Consists of the maximum number of shares that could to be earned upon exercise or vesting of outstanding stock-based awards granted under the 2006 Plan. This includes 232,758 share-settled performance units that could result in a smaller number of securities being earned depending on Company performance, as described in Note 10. of the Notes to the Consolidated Financial Statements.
(2)
Weighted average exercise price of 3,554,308 outstanding stock options.
(3)
The number of securities remaining available for future issuance under the 2006 Plan is 20,500,000 shares less the cumulative number of shares granted under the plan, assuming maximum payout of all share-settled performance units for which performance goals have not yet been set, plus the cumulative number of awards canceled under the plan and, after January 25, 2012, shares surrendered upon issuance to cover employees' related tax liability.
(4)
The number of securities remaining available for future issuance under the ESPP Plan is 5,800,000 shares less the cumulative number of shares that have been issued under the plan.
Item 13.
CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
The information required by this item will be contained in our definitive proxy statement issued in connection with the 2017 Annual Meeting of Stockholders and is incorporated herein by reference.
Item 14.
PRINCIPAL ACCOUNTANT FEES AND SERVICES
The information required by this item will be contained in our definitive proxy statement issued in connection with the 2017 Annual Meeting of Stockholders and is incorporated herein by reference.

41

Table of Contents
Index to Financial Statements


PART IV
Item 15.
EXHIBITS AND FINANCIAL STATEMENT SCHEDULES
(a)Financial Statements
Index to financial statements
 
Page
number
Reports of Independent Registered Public Accounting Firm
 
F-1
Consolidated Balance Sheets at September 30, 2016 and 2015
 
F-3
Consolidated Statements of Operations for the years ended September 30, 2016, 2015 and 2014
 
F-4
Consolidated Statements of Comprehensive Income for the years ended September 30, 2016, 2015 and 2014
 
F-5
Consolidated Statements of Stockholders’ Equity for the years ended September 30, 2016, 2015 and 2014
 
F-6
Consolidated Statements of Cash Flows for the years ended September 30, 2016, 2015 and 2014
 
F-7
Notes to Consolidated Financial Statements
 
F-8
(b)
Financial Statement Schedules
Except for Schedule II, Valuation and Qualifying Accounts, the schedules for which provision is made in the applicable accounting regulations of the SEC are not required under the related instructions or are inapplicable and, therefore, have been omitted. The information required by Schedule II is included in the Notes to Consolidated Financial Statements.
(c)
Exhibits
Exhibit no.
  
Document
2.1
  
Agreement and Plan of Merger dated as of June 17, 2005 among Mueller Water Products, Inc., Walter Industries, Inc., JW MergerCo, Inc. and DLJ Merchant Banking II, Inc., as stockholders’ representative. Incorporated by reference to Exhibit 2.1 to Mueller Water Products, Inc. Form 8-K (File no. 333-116590) filed on June 21, 2005.
2.2
  
Letter Agreement dated as of February 23, 2006 between Walter Industries, Inc. and Mueller Water Products, Inc. Incorporated by reference to Exhibit 10.1 to Mueller Water Products, Inc. Form 8-K (File no. 333-131521) filed February 27, 2006.
2.3
  
Agreement and Plan of Merger, dated as of January 31, 2006, by and among Mueller Holding Company, Inc., Mueller Water Products, LLC and Mueller Water Products Co-Issuer, Inc. Incorporated by reference to Exhibit 2.1 Mueller Water Products, Inc. Form 8-K (File no. 333-116590) filed on February 3, 2006.
2.4
 
Certificate of Merger, dated February 2, 2006, of Mueller Water Products, LLC and Mueller Water Products Co-Issuer, Inc. with and into Mueller Holding Company, Inc. Incorporated by reference to Exhibit 3.1.2 to Mueller Water Products, Inc. Form 8-K (File no. 333-116590) filed on February 3, 2006.
3.1
  
Second Restated Certificate of Incorporation of Mueller Water Products, Inc. Incorporated by reference to Exhibit 3.1 to Mueller Water Products, Inc. Form 8-K (File no. 001-32892) filed on January 25, 2012.
3.2
  
Amended and Restated Bylaws of Mueller Water Products, Inc. Incorporated by reference to Exhibit 3.2 to Mueller Water Products, Inc. Form 8-K (File no. 001-32892) filed on January 25, 2012.
4.1
  
Indenture dated as of May 24, 2007 among Mueller Water Products, Inc., the guarantors named on the signature pages thereto and The Bank of New York (including form of global notes). Incorporated by reference to Exhibit 4.6 to Mueller Water Products, Inc. Form 8-K (File no. 001-32892) filed on May 30, 2007.
4.2
  
Indenture, dated August 26, 2010, among Mueller Water Products, Inc., the guarantors named on the signature pages thereto and The Bank of New York Mellon Trust Company, N.A., as trustee (including form of global notes). Incorporated by reference to Exhibit 4.6 to Mueller Water Products, Inc. Form 8-K (File no. 001-32892) filed on August 27, 2010.
10.2
  
Income Tax Allocation Agreement by and among Walter Industries, Inc., the Walter Affiliates (as defined therein), Mueller Water Products, Inc. and the Mueller Affiliates (as defined therein). Incorporated by reference to Exhibit 10.2 to Mueller Water Products, Inc. Form 8-K (File no. 001-32892) filed on May 30, 2006.
10.3*
  
Mueller Water Products, Inc. Amended and Restated 2006 Stock Incentive Plan. Incorporated by reference to Exhibit A to Mueller Water Products, Inc. Form DEF 14A (File no. 001-32892) filed on December 14, 2011.
10.3.1*
 
Mueller Water Products, Inc. Second Amended and Restated 2006 Stock Incentive Plan. Incorporated by reference to Exhibit D to Mueller Water Products, Inc. Form DEF 14A (File no. 001-32892) filed on January 15, 2006.

42

Table of Contents
Index to Financial Statements


Exhibit no.
  
Document
10.4*
  
Mueller Water Products, Inc. Form of Notice of Stock Option Grant. Incorporated by reference to Exhibit 10.21 to Mueller Water Products, Inc. Form 10-Q (File no. 001-32892) filed on February 9, 2010.
10.4.1*
 
Mueller Water Products, Inc. Form of Notice of Stock Option Grant. Incorporated by reference to Exhibit 10.4 to Mueller Water Products, Inc. Form 10-Q (File no. 001-32892) filed on February 7, 2014.
10.4.2*
 
Mueller Water Products, Inc. Form of Notice of Stock Option Grant. Incorporated by reference to Exhibit 10.4.2 to Mueller Water Products, Inc. Form 10-K (File no. 001-32892) filed on November 26, 2014.
10.5*
  
Mueller Water Products, Inc. Form of Restricted Stock Unit Award Agreement. Incorporated by reference to Exhibit 10.5 to Mueller Water Products, Inc. Form 10-K (File no. 001-32892) filed on November 29, 2012.
10.5.1*
 
Mueller Water Products, Inc. Form of Restricted Stock Unit Award Agreement. Incorporated by reference to Exhibit 10.5 to Mueller Water Products, Inc. Form 10-Q (File no. 001-32892) filed on February 7, 2014.
10.5.2*
 
Mueller Water Products, Inc. Form of Restricted Stock Unit Award Agreement. Incorporated by reference to Exhibit 10.5.2 to Mueller Water Products, Inc. Form 10-K (File no. 001-32892) filed on November 26, 2014.
10.6*
  
Mueller Water Products, Inc. 2006 Employee Stock Purchase Plan, as amended September 27, 2006. Incorporated by reference to Exhibit 10.5 to Mueller Water Products, Inc. Form 10-K (File no. 001-32892) filed on December 21, 2006.
10.6.1*
 
Mueller Water Products, Inc. Amended and Restated 2006 Employee Stock Purchase Plan. Incorporated by reference to Exhibit C to Mueller Water Products, Inc. Form DEF 14A (File no. 001-32892) filed on January 15, 2006.
10.7*
  
Mueller Water Products, Inc. Directors’ Deferred Fee Plan. Incorporated by reference to Exhibit 10.7 to Mueller Water Products, Inc. 8-K (File no. 001-32892) filed on May 30, 2006.
10.8*
  
Form of Mueller Water Products, Inc. Director Indemnification Agreement. Incorporated by reference to Exhibit 99.2 to Mueller Water Products, Inc. 8-K (File no. 001-32892) filed on October 31, 2008.
10.9*
  
Executive Incentive Plan of Mueller Water Products, Inc. Incorporated by reference to Exhibit 10.6 to Mueller Water Products, Inc. 8-K (File no. 001-32892) filed on May 30, 2006.
10.10*
  
Mueller Water Products, Inc. Executive Deferred Compensation Plan. Incorporated by reference to Exhibit 99.3 to Mueller Water Products, Inc. 8-K (File no. 001-32892) filed on October 31, 2008.
10.11*
  
Employment Agreement, dated September 15, 2008 between Mueller Water Products, Inc. and Gregory E. Hyland. Incorporated by reference to Exhibit 99.1 to Mueller Water Products, Inc. Form 8-K (File no. 001-32892) filed on October 6, 2008.
10.11.1*
  
Amendment, dated as of March 2, 2006, to Executive Employment Agreement dated September 9, 2005 between Walter Industries, Inc. and Gregory E. Hyland. Incorporated by reference to Exhibit 10.1 to Mueller Water Products, Inc. Form 8-K (File no. 333-131521) filed on March 3, 2006.
10.11.2*
  
Amended and Restated Mueller Water Products, Inc. Supplemental Defined Contribution Plan, effective as of January 1, 2009. Incorporated by reference to Exhibit 10.13.2 to Mueller Water Products, Inc. Form 8-K (File no. 001-32892) filed on February 9, 2009.
10.11.3*
  
Amendment, dated December 1, 2009, to Executive Employment Agreement, dated September 9, 2005, between Mueller Water Products, Inc. and Gregory E. Hyland. Incorporated by reference to Exhibit 99.1 to Mueller Water Products, Inc. Form 8-K (File no. 001-32892) filed on December 4, 2009.
10.11.4*
 
Amendment, dated December 1, 2010, to Executive Employment Agreement, dated September 9, 2005, between Mueller Water Products, Inc. and Gregory E. Hyland. Incorporated by reference to Exhibit 99.1 to Mueller Water Products, Inc. Form 8-K (File no. 001-32892) filed on December 6, 2010.
10.11.5*
  
Amendment, dated March 31, 2012, to Executive Employment Agreement, dated September 9, 2005, between Mueller Water Products, Inc. and Gregory E. Hyland. Incorporated by reference to Exhibit 99.1 to Mueller Water Products, Inc. Form 10-Q (File no. 001-32892) filed on May 10, 2012.
10.12*
  
Executive Employment Agreement, dated as of July 16, 2008, between Mueller Water Products, Inc. and Evan L. Hart. Incorporated by reference to Exhibit 10.18 to Mueller Water Products, Inc. Form 10-Q (File 001-32892) filed on August 11, 2008.
10.12.1*
  
Amendment, dated December 1, 2009, to Executive Employment Agreement, dated September 6, 2006, between Mueller Water Products, Inc. and Evan L. Hart. Incorporated by reference to Exhibit 99.3 to Mueller Water Products, Inc. Form 8-K (File no. 001-32892) filed on December 4, 2009.
10.12.2*
 
Amendment, dated March 31, 2012, to Executive Employment Agreement, dated September 6, 2006, between Mueller Water Products, Inc. and Evan L. Hart. Incorporated by reference to Exhibit 99.3 to Mueller Water Products, Inc. Form 8-K (File no. 001-3892) filed on May 10, 2012.
10.13*
  
Employment Agreement, dated as of July 31, 2006, between Mueller Water Products, Inc. and Thomas E. Fish. Incorporated by reference to Exhibit 10.2 to Mueller Water Products, Inc. Form 8-K (File no. 001-32892) filed on August 3, 2006.

43

Table of Contents
Index to Financial Statements


Exhibit no.
  
Document
10.14
 
Joint Litigation Agreement dated December 14, 2006 between Walter Industries, Inc. and Mueller Water Products, Inc. Incorporated by reference to Exhibit 10.3 to Mueller Water Products, Inc. Form 8-K (File no. 001-32892) filed on December 19, 2006.
10.15*
 
Form of Executive Change-in-Control Severance Agreement. Incorporated by reference to Exhibit 99.3 to Mueller Water Products, Inc. Form 8-K (File no. 001-32892) filed on October 6, 2008.
10.16*
 
Form of Amendment to Executive Employment Agreement. Incorporated by reference to Exhibit 99.1 to Mueller Water Products, Inc. Form 8-K (File no. 001-32892) filed on February 6, 2009.
10.17*