UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-K
[X] | ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE |
SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended December 31, 2005
OR
[ ] | TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE |
SECURITIES EXCHANGE ACT OF 1934
Commission file number: 1-8120
BAIRNCO CORPORATION
(Exact name of Registrant as specified in its charter)
Delaware 13-3057520
(State or other jurisdiction of (IRS Employer
incorporation or organization) Identification No.)
300 Primera Blvd., Lake Mary, Florida 32746
(Address of principal executive offices) (Zip Code)
Registrant's telephone number, including area code: (407) 875-2222
Securities registered pursuant to Section 12(b) of the Act:
Name of each Exchange on
Title of each class
which registered
Common Stock, par value $.01 per share
New York Stock Exchange
Securities registered pursuant to Section 12(g) of the Act: None
Indicate by check mark if the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. [ ] Yes [X] No
Indicate by check mark if the Registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. [ ] Yes [X] No
Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. [X] Yes [ ] No
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of Registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [X]
Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer (as defined in Exchange Act Rule 12b-2). Large accelerated filer [ ] Accelerated filer [ ] Non-accelerated filer [X]
Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Act). [ ] Yes [X] No
On July 1, 2005, the aggregate market value of the Registrant's voting and non-voting common equity held by non-affiliates was $74,265,563.
On February 10, 2006, there were 7,269,370 shares of Common Stock outstanding, exclusive of treasury shares or shares held by subsidiaries of the Registrant.
Parts I, II and IV incorporate information by reference from the Annual Report to Stockholders for the fiscal year ended December 31, 2005. Part III incorporates information by reference from the Proxy Statement to be filed with the Securities and Exchange Commission no later than 120 days after December 31, 2005 in connection with the Registrant's Annual Meeting of Stockholders to be held on April 20, 2006.
#
PART I
Item 1.
BUSINESS
a.
Recent Developments and Description
Bairnco Corporation was incorporated under the laws of the State of New York on April 9, 1981. Effective September 24, 1991, Bairnco Corporation changed its state of incorporation from New York to Delaware. Unless otherwise indicated herein, the terms "Bairnco" and the "Corporation" refer to Bairnco Corporation and its subsidiaries.
Bairnco operates two core businesses – Arlon and Kasco. Arlon businesses design, manufacture, and sell engineered materials and components for the electronic, industrial and commercial markets. These products are based on common technologies in coating, laminating, polymers, and dispersion chemistry. Kasco is a leading provider of meat-room products and maintenance services for the meat and deli departments of supermarkets; restaurants; meat, poultry and fish processing plants; and manufacturers and distributors of electrical saws and cutting equipment throughout North America, Europe, Asia and South America.
In February of 2000 Bairnco purchased certain assets of the materials business (“Signtech”) of Signtech USA, Ltd., a manufacturer of laminated vinyl fabrics designated for use in the commercial graphics market. In January 2001, Bairnco purchased selected net assets ("Viscor") of Viscor, Inc. Viscor's engineered, coated products include transfer adhesives, single and double-coated foam and film tapes, and other custom coated products. The acquisitions complemented Arlon's graphic and industrial products with product line extensions, additional brand recognition, and penetration into new customer segments and markets. The acquisitions also expanded Arlon's coating and converting capacity.
To improve productivity, reduce costs and improve product development focus, Arlon's Northbrook, Illinois facility was closed on December 31, 2001 and production was transferred to Arlon's Santa Ana, California and East Providence, Rhode Island plants.
In 2003 the Board of Directors approved a plan for the consolidation of its industrial engineered coated product’s businesses in a new leased facility in San Antonio, Texas. The goal was to create a critical business size with a focused management, development, engineering and production team in one location which is more responsive to our customers’ requirements and to the development of new products, and is more cost effective. The consolidation project was substantially completed at the end of 2004. Total consolidation expenses were $2,992,000 plus there was $3,600,000 of capital expenditures in connection with the plan. Operating results remained substantially below expected performance levels during 2005 due to poor production scheduling, increased scrap, inefficient labor and increased raw material costs. Management was changed and signs of improvement were evident by the end of the year. Continued improvement in operations is expected to result in savings in excess of $1,500,000 as compared to 2005.
Arlon’s East Providence, Rhode Island facility was sold for $2.0 million in the fourth quarter of 2004 which resulted in a pre-tax gain of $1.2 million.
During the second quarter of 2003, Arlon, Inc. purchased the MOX-Tape® brand of products, including inventory and related equipment, from Flexfab Horizons International, Inc., of Hastings, Michigan. The business was moved to Arlon’s Bear, Delaware plant. MOX-Tape® products consist of un-reinforced and reinforced silicone, self-fusing tapes used in a broad range of applications and markets, including high temperature electrical and mechanical insulation for the military, aerospace, automotive, utility, and power generation markets. The acquisition expanded Arlon’s self-fusing silicone tapes product line with the addition of the reinforced tapes. Arlon is a leader in semi-cured and uncured precision-calendered silicone, silicone-coated fabrics, and silicone self-fusing tapes.
During 2004, plans were approved to establish a China manufacturing facility for Arlon’s Electronic Materials. Due to delays in permitting and licensing, ground-breaking only occurred in December 2005. Actual production is expected to begin by the third quarter of 2006. Organizational costs of $529,000 were incurred in 2005 of which $140,000 is reflected in cost of sales and $389,000 in selling and administrative expenses. Organizational and start up expenses of $500,000 are estimated to be incurred primarily in the first half of 2006. There will be additional redundancy costs in the second half that will be a function of how smoothly and quickly the plant goes into production. Capital expenditures of $2.5 million were incurred in 2005 and are estimated at $4.4 million in 2006. The plant will produce specialty laminates for our customers worldwide. The two laminate plants in the United States will continue to operate but with reduced volumes.
During 2005, Kasco successfully transitioned its manufacturing operations to Mexico and was in full operation by the end of the third quarter. The costs of relocation in 2005 were $987,000 versus the initial estimate of $500,000. The increased costs were driven by the inherent inefficiencies of running two factories longer than anticipated due to delays in moving the equipment and transitioning all production until the third quarter. Total capital expenditures related to the relocation were $865,000 in 2005 versus budget of $775,000.
At December 31, 2005, Bairnco employed 878 persons including 20 headquarters personnel. Bairnco's operations occupy approximately 885,000 square feet of factory and office space at its principal locations. There is an additional 20,000 square feet of leased space used as field warehouses throughout North America.
b. & c.
Financial Information about Industry Segments and Narrative Description of Business
Bairnco Corporation is a diversified multinational company that operates two businesses. Arlon’s two segments are Electronic Materials and Coated Materials, which design, manufacture and sell products under the Arlon brand identity to electronic, industrial and commercial markets. Arlon products are based on common technologies in coating, laminating, polymers and dispersion chemistry. Replacement Products and Services are manufactured and distributed under the Kasco brand identity principally to supermarkets, meat and deli operations, and meat, poultry and fish processing plants throughout the United States, Canada and Europe. Kasco also manufactures small band saw blades for cutting metal and wood, and large band saw blades for use at lumber mills. In Canada and France, in addition to providing its replacement products, Kasco also sells equipment to the supermarket and food processing industries.
Financial data and other information about the Corporation's segments is set forth in Note 9 to the Consolidated Financial Statements on pages 42 and 43 and on pages 4 through 7 of Bairnco's 2005 Annual Report to Stockholders which is incorporated herein by reference. This information should be read in conjunction with the "Financial History" set forth under “Item 6. SELECTED FINANCIAL DATA” of this filing, and "Management's Discussion and Analysis" set forth on pages 10 through 20 of Bairnco's 2005 Annual Report to Stockholders, which is incorporated herein by reference.
The principal facilities utilized by each segment are detailed under "Item 2. PROPERTIES" of this filing.
#
ARLON ELECTRONIC MATERIALS SEGMENT
Description of Business
Arlon Electronic Materials’ principal products include high performance materials for the printed circuit board industry and silicone rubber-based insulation materials used in a broad range of industrial, military/aerospace, consumer and commercial markets.
Arlon is known worldwide as a premier supplier of high technology materials to the printed circuit board (PCB) industry. Arlon products are marketed principally to original equipment manufacturers (OEM’s) and PCB manufacturers by a direct technical sales force, as well as, distributors in the US, and through distributors and manufacturer’s representatives in Europe, the Middle East, and Asia-Pacific, supported by direct technical sales specialists. Arlon’s conventional laminates product line includes a wide variety of specialty polyimide and epoxy laminates and bonding films, as well as, other high performance thermoset laminates. These materials are used in demanding commercial and military market applications including high density interconnect (HDI), surface mount technology (SMT), heat sink bonding, semiconductor testing, wireless communications and microvia PCB's. The microwave and RF product area offers fluoropolymers (i.e. PTFE), ceramic-filled fluoropolymers, and other non-PTFE laminates that deliver the electrical performance needed in frequency-dependent circuit applications such as analog, digital and personal communication systems (PCS), high frequency military electronics, microwave antennas and base stations. These products are supplied as copper-clad laminates with bonding plies or prepregs for production of multi-layer printed circuits.
Arlon also manufactures a line of silicone rubber materials used in a broad range of military, consumer, industrial and commercial products. Typical applications and products include: silicone bagging materials for producing composite parts; silicone insulating tapes for electric traction motor coil windings; insulation materials for industrial and commercial flexible heaters; silicone materials for high temperature hose and duct markets; insulating tape for medium and high voltage electrical splices and self-fusing tapes for a variety of industrial and commercial applications; as well as compliant, thermally or electrically conductive silicone film adhesives known as Thermabond™ for heat sink-bonding to printed circuit boards.
Competition
There are numerous competitors ranging in size from small, sole proprietorships to units of very large, multinational corporations that in certain instances have far greater market positions and financial resources than the Corporation’s.
Competition for Arlon's products varies by product line and type of customer. Competition for established lines is usually based on one or more elements such as specification position, lead time, price, product performance, or technical support and customer service. It may also be based on the ability to service emerging technologies through the custom design of new products, or redesign of existing products, as well as the development of materials for new applications. As an example, for some high performance materials sold to the printed circuit board industry, the consistent technical performance of the materials supplied in excess of specified standards can be the critical competitive element. In addition, Arlon sells a significant portion of its circuit board materials into the Far East and European markets where local producers of similar materials have a competitive advantage related to their geographic location.
Distribution
Arlon products are marketed by company sales personnel, as well as outside sales representatives and distributors in North and South America, Europe, the Middle East, Asia-Pacific, and other international markets.
Raw Materials and Purchased Parts
The essential raw materials used in Arlon Electronic Materials are silicone rubber, fiberglass cloth, pigments, copper foil, aluminum and Alloy 600 foil, polyethylene foam and various plastic films, special papers and release liners, vinyl resins, various adhesives and solvents, Teflon™ or polytetrafluoroethylene (PTFE) resin, polyimide resin, epoxy resins, other thermoset resins, as well as, various chemicals. Generally, these materials are each available from several qualified suppliers. There are, however, several raw materials used in Arlon Electronic Materials’ products that are purchased from chemical companies that are proprietary in nature. Other raw materials are purchased from a single approved vendor on a "sole source" basis, although alternative sources could be developed in the future if necessary. However, the qualification procedure can take several months or longer and could therefore interrupt production if the primary raw material source became unexpectedly unavailable. Current suppliers are located in the United States, Asia, and Europe.
Patents and Trademarks
The Corporation owns patents and several registered trademarks under which certain Arlon Electronic Materials’ products are sold. The Corporation does not believe that the loss of any or all of these trademarks would have a material adverse effect on this segment.
#
ARLON COATED MATERIALS SEGMENT
Description of Business
Arlon Coated Materials’ principal products include adhesive coated cast and calendered vinyl films, cast vinyl fabric, custom-engineered laminates, and coated and laminated films, foils, foams and papers used in a broad range of industrial, consumer and commercial products.
Arlon specialty graphic films are marketed under the Arlon, CalonÒ and MII™ brand names and include cast and calendered vinyl films that are manufactured in a wide variety of colors, face stocks and adhesive systems. These vinyl films are used in commercial and electrical signage, point of purchase displays, highway signage, fleet markings, and other commercial advertising applications. Arlon also manufactures laminated vinyl fabrics for corporate identity programs. These products are marketed under the Signtechâ brand name and complement the CalonÒ specialty graphic films.
Arlon manufactures and markets custom-engineered laminates and coated products. Typical applications include insulating foam tapes for thermopane windows, specialty flexible circuit materials, electrical insulation materials for motors and transformers, thermal insulation panels for appliances and cars, durable printing stock, transfer adhesives used in industrial assembly, and single and double-coated foam and film tapes and other custom engineered laminates for specific industrial applications.
Competition
There are numerous competitors ranging in size from small, sole proprietorships to units of very large, multinational corporations that in certain instances have far greater market positions and financial resources than the Corporation’s.
Competition varies by product line and type of customer. While competition for established lines is usually based on one or more of lead time, price, product performance, or technical support and customer service, it may also be based on the ability to service emerging technologies through the custom design of new products, or redesign of existing products, and materials for the new applications.
Distribution
Arlon Coated Materials’ products are marketed by company sales personnel, outside sales representatives and distributors in North and South America, Europe, Australia, the Far East and several other international markets.
Raw Materials and Purchased Parts
The essential raw materials used by Arlon Coated Materials include pigments, copper foil, aluminum foil, polyethylene foam and various plastic films, calendered vinyl, special papers and release liners, vinyl resins, various adhesives and solvents, and various chemicals. Generally, these materials are each available from several qualified suppliers. There are, however, several raw materials used in Arlon Coated Material's products that are purchased from chemical companies and are proprietary in nature. Other raw materials are purchased from a single approved vendor on a "sole source" basis, although alternative sources could be developed in the future if necessary. However, the qualification procedure can take from several months to an extended period of time and could therefore interrupt production if the primary raw material source was lost unexpectedly. Current suppliers are located in the United States, Asia, and Europe.
Patents and Trademarks
The Corporation owns several registered trademarks under which certain Arlon Coated Materials’ products are sold. The Corporation does not believe that the loss of any or all of these trademarks would have a material adverse effect on this segment.
#
KASCO REPLACEMENT PRODUCTS AND SERVICES SEGMENT
Description of Business
Kasco is a leading provider of meat-room products and repair services for the meat, deli, and seafood departments of supermarkets; for restaurants; for meat, poultry and fish processing plants; and for manufacturers and distributors of electrical saws and cutting equipment throughout North America, Europe, Asia, and South America. These products and services include band saw blades for cutting meat and fish, band saw blades for cutting wood and metal, grinder plates and knives for grinding meat, repair and maintenance services for food equipment in retail grocery and restaurant operations, electrical saws and cutting machines, seasoning products, and other related butcher supply products.
Kasco’s products and services are sold under a number of brand names including Kasco Corporation in the United States and Canada, Atlantic Service Co. in the United Kingdom and Canada, Bertram & Graf in Germany, and Biro France and EuroKasco in France.
Competition and Marketing
Kasco competes with several large and medium-sized national and regional companies, as well as numerous small local companies. The principal methods of competition are product quality, geographic coverage capability to service customers, equipment repair service capability, and product price.
Kasco has a significant distribution network that reaches over 20,000 retail grocery stores, restaurants, delis, and processing plants in the US, Canada, Europe, Latin America and Asia. Kasco’s distribution network is made up of corporate-direct salesmen, route salesmen, repair service technicians, and distributors who have in-depth knowledge of the local markets and each customer’s needs. Kasco’s geographic reach also includes product sourcing. Kasco manufactures or sources high quality and competitively priced meat room cutting blades, butcher supplies, and repair parts, from factories and suppliers around the world.
During 2005, Kasco made significant investment in its North America and UK operations. Kasco North America relocated its primary manufacturing facility from St. Louis to Matamoros, Mexico. Both Kasco North America and Atlantic Service Co, UK invested in significant new coil manufacturing capacity. Kasco North America also expanded its US and Canada Service Repair network, by hiring new technicians and investing in new vehicles, computers, and parts inventory.
Since 2000, the market environment for Kasco has been difficult due to market contraction through retail consolidation and the industry’s shift to “Case Ready” product offerings. Kasco has responded by successfully diversifying into repair and maintenance services for the retail grocery industry, and by globally sourcing and effectively distributing high quality and competitively priced butcher supplies and equipment. During 2006, Kasco will continue to diversify and expand its repair services business and butcher supplies distribution business. Kasco will also make investments in new productivity projects during 2006, to further improve our cost position, product quality, and distribution capability.
Raw Materials and Purchased Supplies
High quality carbon steel and stainless steel are the principal raw materials used in the manufacture of band saw blades; they are purchased from multiple domestic and international suppliers. Tool steel is utilized in manufacturing meat grinder plates and knives and is purchased from qualified suppliers located in the United States, Europe and Japan. Equipment, replacement parts, and supplies are purchased from a number of manufacturers and distributors in Asia, the United States, and Europe. In France and Canada, certain specialty equipment and other items used in the supermarket industry and in the food processing industry are purchased and resold under exclusive distributorship agreements with the equipment manufacturers. All of the raw materials and purchased products utilized by this segment have been readily available throughout this last year.
Patents and Trademarks
The Corporation has a number of US and foreign mechanical patents related to several of the products manufactured and sold by Kasco, as well as a number of design patents and registered trademarks. The Corporation does not believe, however, that the loss of any or all of those patents would have a material adverse effect on this segment.
FOREIGN OPERATIONS
The Corporation has foreign operations located in Canada, Mexico, China, the United Kingdom, France and Germany. Information on the Corporation's operations by geographical area for the last three fiscal years is set forth in Note 9 to the Consolidated Financial Statements on pages 42 and 43 of Bairnco's 2005 Annual Report to Stockholders which is incorporated herein by reference.
In addition, export sales from the Corporation's US based operations for the years ended December 31, 2005, 2004 and 2003 were approximately $42,853,000, $43,557,000 and $37,668,000, respectively. Export sales to any particular country or geographic area did not exceed 10% of consolidated sales during any of these years.
#
Item 2.
PROPERTIES
The following chart lists for the Corporation as a whole, and by each of its segments, the principal locations of the Corporation's facilities and indicates whether the property is owned or leased and if leased, the lease expiration date:
LEASED OR OWNED | |||||
LOCATION | SQUARE FEET | (LEASE EXPIRATION) | |||
CORPORATION TOTAL | 905,000 | ||||
Headquarters | |||||
Lake Mary, FL | 11,000 | Leased (Expires 2009) | |||
Arlon Electronic Materials | |||||
Bear, DE | 135,000 | Owned | |||
Rancho Cucamonga, CA | 80,000 | Owned | |||
Suzhou New District, PRC | 16,000 | Leased (Expires 2006) | |||
Arlon Coated Materials | |||||
Dallas, TX | 75,000 | Leased (Expires 2006) | |||
San Antonio, TX | 96,000 | Leased (Expires 2008) | |||
San Antonio, TX | 16,000 | Leased (Expires 2008) | |||
Santa Ana, CA | 124,000 | Leased (Expires 2008) | |||
San Antonio, TX | 138,000 | Leased (Expires 2012) | |||
Kasco Replacement Products and Services | |||||
Gwent, Wales, UK | 25,000 | Owned | |||
Montreal, Canada | 11,000 | Leased (Expires 2006) | |||
Pansdorf, Germany | 18,000 | Owned | |||
Paris, France | 22,000 | Leased (Expires 2009) | |||
Matamoros, Mexico | 40,000 | Owned | |||
St. Louis, MO | 78,000 | Owned | |||
Field Warehouses: | |||||
42 locations in North America | 20,000 | Leased | |||
#
Item 3.
LEGAL PROCEEDINGS
As discussed in "Management's Discussion and Analysis" set forth on pages 10 through 20 of Bairnco's 2005 Annual Report to Stockholders and in Note 10 to the Consolidated Financial Statements, which is incorporated herein by reference, in the third quarter 2004 Bairnco obtained final resolutions on three long-pending lawsuits.
In one of these lawsuits (the “Transactions Lawsuit’), trustees representing asbestos claimants brought claims of over $700 million against Bairnco, its subsidiaries, and other defendants. A judgment in favor of the defendants was affirmed in May 2004 by the U.S. Court of Appeals for the Second Circuit. Plaintiffs’ time to seek review by the United States Supreme Court of the Court of Appeals’ decision expired in August 2004.
A second lawsuit by these trustees against Bairnco (the “NOL Lawsuit”), involving a dispute over federal income tax refunds that had been held in escrow since the 1990s, was settled in September 2004. Pursuant to a settlement agreement dated September 10, 2004, Bairnco received $24,695,000 (about 70 percent of the escrowed funds), and the NOL Lawsuit was dismissed with prejudice.
The final resolution of the Transactions Lawsuit in favor of Bairnco resulted in the final resolution of a third lawsuit brought by these trustees (the “Properties Lawsuit”), involving a dispute over the title to certain real and personal property. In 2001, when the Properties Lawsuit was dismissed, without prejudice, against Bairnco and its Arlon subsidiary, the parties agreed that this dispute would be determined in accordance with the final resolution of the Transactions Lawsuit.
Bairnco Corporation and its subsidiaries are defendants in a number of other pending actions. Management of Bairnco believes that the disposition of these other actions will not have a material adverse effect on the consolidated results of operations or the financial position of Bairnco and its subsidiaries as of December 31, 2005.
#
Item 4.
SUBMISSION OF MATTERS TO VOTE OF SECURITY HOLDERS
No matter was submitted to a vote of security holders during the fourth quarter of 2005.
EXECUTIVE OFFICERS OF THE REGISTRANT
The information required with respect to executive officers of the Corporation is as follows:
Name & Age of Executive Officers | Data Pertaining to Executive Officers |
Luke E. Fichthorn III (64) | Mr. Fichthorn has served as Chairman of Bairnco since May 23, 1990, and on December 18, 1991, became Chief Executive Officer of Bairnco. For over twenty-five years, Mr. Fichthorn has been a private investment banker and partner of Twain Associates, a private investment banking and consulting firm. Mr. Fichthorn served as a director of Keene Corporation, a former subsidiary of Bairnco Corporation from August 1969 until May 1981, and became a director of Bairnco in January 1981. Mr. Fichthorn is also a director of Florida Rock Industries, Inc. and Patriot Transportation Holding, Inc., neither of which is affiliated with Bairnco. |
Larry D. Smith (56) | Mr. Smith was elected Vice President - Administration and Secretary of Bairnco in April 1999. Prior to joining Bairnco, Mr. Smith was employed for over 14 years with Emerson Electric Company in various human resource managerial capacities. Most recently, Mr. Smith was Vice President Human Resources for Emerson’s Therm-O-Disc, Inc. division in Mansfield, Ohio. |
Kenneth L. Bayne (36) | Mr. Bayne joined Bairnco on August 8, 2005 as Vice President Finance and Chief Financial Officer of Bairnco. Prior to joining Bairnco, Mr. Bayne was with Guidant Corporation where he served for nine years in a series of increasingly responsible positions, culminating in his most recent position as assistant treasurer for the company. Prior to that, he served for three years as a senior associate design engineer with Thiokol Corporation. |
Lawrence C. Maingot (46) | Mr. Maingot was appointed Corporate Controller of Bairnco in December 1999. From May 1997 to December 1999, Mr. Maingot was Bairnco’s Assistant Controller. From April 1992 to May 1997, Mr. Maingot was Bairnco’s Accounting Manager. Prior to joining Bairnco, Mr. Maingot was employed with Arthur Andersen LLP. |
PART II
Item 5.
MARKET FOR THE REGISTRANTS COMMON EQUITY AND RELATED STOCKHOLDER MATTERS
a. & c. Data regarding market prices of Bairnco's common stock is included in the "Quarterly Results of Operations (Unaudited)" on page 21 of Bairnco's 2005 Annual Report to Stockholders which is incorporated herein by reference. Bairnco's common stock is traded on the New York Stock Exchange under the symbol BZ. Data on dividends paid is included in the Consolidated Statements of Income on page 23 of Bairnco's 2005 Annual Report to Stockholders, which is incorporated herein by reference. In November of 2004 the Board of Directors increased the quarterly cash dividend to $.06 per share from $.05 per share. The total dividend for 2005 was $0.24 per share and $0.21 per share in 2004. The Board continues to review the dividend on a quarterly basis.
b. The approximate number of registered holders of Bairnco common stock (par value $.01 per share) as of December 31, 2005 was 890.
#
Item 6.
SELECTED FINANCIAL DATA
The following table contains certain financial and operating data and is qualified by the more detailed consolidated financial statements and notes thereto included in Bairnco's 2005 Annual Report to Stockholders which is incorporated herein by reference. The balance sheet data as of December 31, 2005 and 2004 and the statement of operations data for the fiscal years then ended, were derived from the consolidated financial statements and notes thereto that have been audited by Grant Thornton LLP, independent registered public accounting firm. The balance sheet data as of December 31, 2003 and 2002 and the statement of operations data for the fiscal years ended December 31, 2003 and 2002 were derived from the consolidated financial statements and notes thereto that were audited by Ernst & Young LLP, independent registered public accounting firm. The balance sheet data as of December 31, 2001 and the statement of operations data for the fiscal year ended December 31, 2001 were derived from the consolidated financial statements and notes thereto that were audited by Arthur Andersen LLP. The financial data shown below should be read in conjunction with the consolidated financial statements and the related notes thereto and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” included in Bairnco's 2005 Annual Report to Stockholders which is incorporated herein by reference.
#
FINANCIAL HISTORY
2005 | 2004 | 2003 | 2002 | 2001 | ||
Summary of Operations ($ in thousands) | ||||||
Net sales | $ | 165,900 | 165,496 | 152,696 | 154,354 | 160,369 |
Gross profit | $ | 47,469 | 47,884 | 42,871 | 44,991 | 46,535 |
Earnings before provision for litigation costs, interest and taxes (a) | $ | 5,591 | 8,057 | 4,623 | 6,802 | 7,395 |
Provision for litigation costs | $ | -- | -- | -- | 4,000 | 6,200 |
Operating profit | $ | 5,591 | 8,057 | 4,623 | 2,802 | 1,195 |
Interest expense, net | $ | 54 | 566 | 768 | 1,005 | 2,486 |
Income (loss) before income taxes | $ | 5,537 | 7,491 | 3,855 | 1,797 | (1,291) |
Provision (benefit) for income taxes | $ | 1,937 | 2,372 | 1,206 | 436 | (983) |
Income (loss) from continuing operations | $ | 3,600 | 5,119 | 2,649 | 1,361 | (308) |
Income from spun off subsidiary | $ | -- | 25,710 | -- | -- | -- |
Net income (loss) | $ | 3,600 | 30,829 | 2,649 | 1,361 | (308) |
Return from operations on: | ||||||
Net sales | % | 2.2 | 3.1 | 1.7 | 0.9 | (0.2) |
Average stockholders’ investment | % | 4.3 | 7.7 | 5.0 | 2.7 | (0.6) |
Average capital employed | % | 4.1 | 6.5 | 3.7 | 2.4 | 1.3 |
Yearend Position ($ in thousands) | ||||||
Working capital | $ | 41,820 | 38,220 | 32,573 | 23,850 | 25,801 |
Working capital as a % of sales | % | 25.2 | 23.1 | 21.3 | 15.5 | 16.1 |
Plant and equipment, net | $ | 34,373 | 34,429 | 36,476 | 37,468 | 42,602 |
Total assets | $ | 125,768 | 118,781 | 118,229 | 115,584 | 118,255 |
Total debt | $ | 9,436 | 1,924 | 31,833 | 27,747 | 33,584 |
Stockholders’ investment | $ | 83,458 | 84,767 | 54,298 | 51,516 | 50,018 |
Capital employed | $ | 92,894 | 86,691 | 86,131 | 79,263 | 83,602 |
Per Common Share Data | ||||||
Basic Earnings (loss) per share from continuing operations | $ | 0.49 | 0.70 | 0.36 | 0.19 | (0.04) |
Basic Earnings per share from spun off subsidiary | $ | -- | 3.49 | -- | -- | -- |
Basic earnings (loss) per share | $ | 0.49 | 4.19 | 0.36 | 0.19 | (0.04) |
Diluted Earnings (loss) per share from continuing operations | $ | 0.47 | 0.68 | 0.36 | 0.19 | (0.04) |
Diluted Earnings per share from spun off subsidiary | $ | -- | 3.40 | -- | -- | -- |
Diluted earnings (loss) per share | $ | 0.47 | 4.07 | 0.36 | 0.19 | (0.04) |
Cash dividend | $ | 0.24 | 0.21 | 0.20 | 0.20 | 0.20 |
Stockholders’ investment | $ | 10.96 | 11.20 | 7.35 | 7.02 | 6.82 |
Market price: | ||||||
High | $ | 12.210 | 11.9000 | 7.1500 | 6.1000 | 8.4000 |
Low | $ | 8.660 | 6.0000 | 4.6500 | 4.6900 | 5.1500 |
Other Data (in thousands) | ||||||
Depreciation and amortization | $ | 7,456 | 7,668 | 7,797 | 8,113 | 9,082 |
Capital expenditures | $ | 7,304 | 5,996 | 5,664 | 3,811 | 3,081 |
Weighted average common shares outstanding | 7,350 | 7,362 | 7,338 | 7,332 | 7,321 | |
Weighted average diluted common shares outstanding | 7,613 | 7,569 | 7,391 | 7,337 | 7,321 | |
Current ratio | 2.8 | 2.7 | 2.3 | 1.7 | 1.8 | |
Number of registered common stockholders at yearend | 890 | 944 | 992 | 1,066 | 1,148 | |
Average number of employees | 836 | 770 | 755 | 789 | 841 | |
Sales per employee | $ | 198,440 | 214,930 | 202,250 | 195,600 | 190,700 |
(a) Excludes impact of pre-tax provisions for litigation costs of $4.0 million in 2002 and $6.2 million in 2001.
#
Item 7.
MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
Reference is made to the "Management's Discussion and Analysis" on pages 10 through 20 of Bairnco's 2005 Annual Report to Stockholders which is incorporated herein by reference.
Item 7A.
QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET
RISK
Market risks relating to the Corporation's operations result primarily from changes in interest rates and changes in foreign currency exchange rates.
Impact of Interest Rates
The interest on the Corporation’s bank debt is floating and based on prevailing market interest rates. For market rate based debt, interest rate changes generally do not affect the market value of the debt but do impact future interest expense and hence earnings and cash flows, assuming other factors remain unchanged. A theoretical one-percentage point increase (decrease) in market rates in effect on December 31, 2005 would change interest expense and hence change the net income of the Corporation by approximately $62,000 per year.
The following table summarizes the principal cash flows of the Corporation's financial instruments outstanding at December 31, 2005, categorized by type of instrument and by year of maturity. There have been no changes in market risk factors for the year ended December 31, 2005.
2006 | 2007 | 2008 | 2009 | Total | Fair Value | |
(in thousands) | ||||||
Short Term Debt | $2,233 | $ -- | $ -- | $ -- | $2,233 | $2,233 |
Long Term Debt: | ||||||
Revolving line of credit – domestic (5.3% - 5.35% interest rate) | -- | -- | 3,500 | -- | 3,500 | 3,500 |
Revolving line of credit – foreign (3.4% to 4.3% interest rate) | -- | -- | 887 | -- | 887 | 887 |
China Loan Facility (6.26% interest rate) | -- | -- | 2,583 | -- | 2,583 | 2,583 |
Note Payable | 100 | 100 | -- | -- | 200 | 199 |
Other Foreign Loan Facility | 34 | -- | -- | -- | 34 | 34 |
Impact of Foreign Currency Exchange Rates
The Corporation’s sales denominated in a currency other than U.S. dollars were approximately 19.6% of total sales for the year ended December 31, 2005. Net assets maintained in a functional currency other than U.S. dollars at December 31, 2005 were approximately 10.7% of total net assets. The translation effect of changes in foreign currency exchange rates on the Corporation's revenues, earnings and net assets maintained in a functional currency other than U.S. dollars has not historically been significant. At December 31, 2005, a 10% weaker U.S. dollar against the currencies of all foreign countries in which the Corporation had operations during 2005, would have resulted in an increase of revenues by $2.7 million, and an increase in operating profit by $128,000. A 10% stronger U.S. dollar would have resulted in similar decreases to revenues and operating profit.
Effect of Inflation
General inflation has had minimal impact on Bairnco's operating results in the last three years. Sales prices and volumes have been more strongly influenced by specific market supply and demand and by foreign currency exchange rate fluctuations than by inflationary factors.
Item 8.
FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
Reference is made to the Consolidated Financial Statements and accompanying Notes included on pages 27 through 44 and the "Quarterly Results of Operations (Unaudited)" on page 21 of Bairnco's 2005 Annual Report to Stockholders which is incorporated herein by reference. Financial Statement Schedules are included in Part IV of this filing.
Item 9.
CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
None.
#
Item 9A.
CONTROLS AND PROCEDURES
Limitations on the Effectiveness of Controls
Our management, including our Chief Executive Officer and Chief Financial Officer, does not expect that our Disclosure Controls or Internal Controls will prevent all errors and all fraud. A control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs.
Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within our company have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty and that breakdowns can occur because of a simple error or mistake. Additionally, controls can be circumvented by the individual acts of some persons, by collusion of two or more people or by management override of the control. The design of any system of controls also is based partly on certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions.
Notwithstanding the foregoing limitations, we believe that our Disclosure Controls and Internal Controls provide reasonable assurances that the objectives of our control system are met.
Quarterly Evaluation of the Company’s Disclosure Controls and Internal Controls
a)
The Corporation carried out an evaluation, under the supervision and with the participation of the Corporation’s management, including the Corporation’s Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of the Corporation’s disclosure controls and procedures as of December 31, 2005, pursuant to Rule 13a-14 of the Securities Exchange Act of 1934 (the “Exchange Act”). Based upon that evaluation, the Chief Executive Officer and Chief Financial Officer concluded that the Corporation’s disclosure controls and procedures are effective in timely alerting them to material information relating to the Corporation (including its consolidated subsidiaries) required to be included in the Corporation’s Exchange Act filings.
b)
There have been no significant changes in the Corporation’s internal controls or in other factors which could significantly affect internal controls subsequent to the date the Corporation carried out its evaluation.
Item 9B.
OTHER INFORMATION
None.
#
PART III
Item 10.
DIRECTORS AND EXECUTIVE OFFICERS OF THE REGISTRANT
The information required with respect to directors and the audit committee of Bairnco is included in the Proxy Statement for the 2006 Annual Meeting of Stockholders of Bairnco, to be filed with the Securities and Exchange Commission no later than 120 days after December 31, 2005, and is incorporated herein by reference.
See the information regarding executive officers of the Corporation on page 13 of this Annual Report on Form 10-K.
On January 29, 2004, the Board of Directors of Bairnco Corporation (the “Board”) adopted the Financial Code of Ethical Conduct, which applies to the Corporation’s Chief Executive Officer and the chief financial officer, the other financial officers and other financial managers. The Financial Code of Ethical Conduct is posted on the Corporation’s internet site at www.bairnco.com.
The Board has determined that the Corporation has at least one audit committee financial expert serving on its audit committee. Gerald L. DeGood, Chairman of the Audit Committee, qualifies as an audit committee financial expert and is an independent member of the Board. Mr. DeGood meets the independence requirements as set forth in the Exchange Act Section 10A(m)(3).
Item 11.
EXECUTIVE COMPENSATION
The information required by Item 11 is included in the Proxy Statement for the 2006 Annual Meeting of Stockholders of Bairnco, to be filed with the Securities and Exchange Commission no later than 120 days after December 31, 2005, and is incorporated herein by reference.
Item 12.
SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND
MANAGEMENT AND RELATED STOCKHOLDER MATTERS
The information required by Item 12 is included in the Proxy Statement for the 2006 Annual Meeting of Stockholders of Bairnco, to be filed with the Securities and Exchange Commission no later than 120 days after December 31, 2005, and is incorporated herein by reference.
#
Item 13.
CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS
The information required by Item 13 is included in the Proxy Statement for the 2006 Annual Meeting of Stockholders of Bairnco, to be filed with the Securities and Exchange Commission no later than 120 days after December 31, 2005, and is incorporated herein by reference.
Item 14.
PRINCIPAL ACCOUNTING FEES AND SERVICES
The following table presents fees charged for professional audit services rendered by Grant Thornton, LLP and Ernst & Young, LLP for the audit of the Company’s financial statements for the years ended December 31, 2005 and 2004 and fees billed for other services during those years. Grant Thornton, LLP was the principal accountant of the Company beginning in the second quarter of 2004. Ernst & Young, LLP was the principal accountant of the Company during the first quarter of 2004.
2005 | 2004 | |
Audit fees (1) | $206,000 | $203,900 |
Audit related fees (2) | 23,800 | 34,600 |
Tax fees (3) | 17,400 | 8,000 |
All other fees | -- | -- |
Total | $247,200 | $246,500 |
(1)
Audit fees consisted of audit work (including the tax accrual review) performed in connection with the preparation of the quarterly and year end financial statements, European statutory audits and review of documents filed with the SEC.
(2)
Audit related fees consisted of audits of employee benefit plans, consulting related to Section 404 of the Sarbanes-Oxley Act (Ernst & Young LLP only) and a review of the NOL Lawsuit settlement (Grant Thornton LLP only).
(3)
Tax fees consisted of assistance related to tax compliance and reporting.
Pre-Approval of Audit & Non-Audit Services – Under the Corporation’s Audit Committee Charter, the Audit Committee of the Board of Directors (“Audit Committee”) is required to pre-approve all auditing services and permissible non-audit services, including related fees and terms, to be performed for the Corporation by the independent auditor, subject to de-minimus exceptions for non-audit services described under Section 10A(i)(1)(B) of the Securities Exchange Act of 1934 which are approved by the Audit Committee prior to the completion of the engagement, provided that such services had not been recognized as non-audit services at the time of the engagement.
All pre-approvals must take place in advance of the services within a period not to exceed three months prior to the start of the engagement. The proposals submitted by the independent accountant to the Audit Committee for pre-approval must be specific as to the type of service and provide detail of the scope of work and fee estimate, including out-of-pocket expenses. The proposals must include detailed back-up documentation regarding the specific services to be provided. Any expected change in the audit scope or related fees from the pre-approved amounts will also require pre-approval in advance of the additional work.
The Committee may form and delegate authority to subcommittees consisting of one or more of its members when appropriate, including the authority to grant pre-approvals of audit and permissible non-audit services, provided that decisions of such subcommittees to grant pre-approvals shall be presented to the full Committee at its next scheduled meeting. The Committee will not delegate to management any of the Committee’s responsibilities related to pre-approval of audit and permissible non-audit services.
The Audit Committee pre-approved all audit services, audit related services and tax review and compliance services for the Corporation by Grant Thornton LLP during 2005.
#
PART IV
Item 15.
EXHIBITS, FINANCIAL STATEMENT SCHEDULES AND REPORTS ON FORM 8-K
a)
1. Financial Statements
Included in the 2005 Annual Report to Stockholders which is included as Exhibit 13 to this Annual Report on Form 10-K:
·
Reports of Independent Registered Public Accounting Firms;
·
Consolidated Statements of Operations for the years ended December 31, 2005, 2004 and 2003;
·
Consolidated Statements of Comprehensive Income for the years ended December 31, 2005, 2004 and 2003;
·
Consolidated Balance Sheets as of December 31, 2005 and 2004;
·
Consolidated Statements of Cash Flows for the years ended December 31, 2005, 2004 and 2003;
·
Consolidated Statements of Stockholders' Investment for the years ended December 31, 2005, 2004 and 2003;
·
Notes to Consolidated Financial Statements.
2. Financial Statement Schedules
Included in Part IV of this Annual Report on Form 10-K:
·
Financial Statement Schedule for the years ended December 31, 2005, 2004 and 2003:
Schedule II - Valuation and Qualifying Accounts on page 24 of this Annual Report on Form 10-K.
All other schedules and notes are omitted because they are either not applicable, not required or the information called for therein appears in the Consolidated Financial Statements or Notes thereto.
3. See Index to Exhibits on pages 27 through 30 of this Annual Report on Form 10-K.
#
BAIRNCO CORPORATION AND SUBSIDIARIES
SCHEDULE II - VALUATION AND QUALIFYING ACCOUNTS
FOR THE YEARS ENDED DECEMBER 31, 2005, 2004 AND 2003
Year Ended December 31, | Balance Beginning of Year | Expenses | Accounts Written-off | Recoveries and Other | Balance End of Year |
2005 | |||||
Allowance for | |||||
doubtful accounts | $1,546,000 | $ -- | $ (477,000) | $(55,000) | $1,014,000 |
2004 | |||||
Allowance for | |||||
doubtful accounts | $1,358,000 | $ 877,000 | $ (713,000) | $ 24,000 | $1,546,000 |
2003 | |||||
Allowance for | |||||
doubtful accounts | $1,295,000 | $ 371,000 | $ (308,000) | $ -- | $1,358,000 |
#
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
BAIRNCO CORPORATION | |
(Registrant) | |
Date: February 22, 2006 | By: /s/ Kenneth L. Bayne |
Kenneth L. Bayne | |
Vice President Finance | |
(Chief Financial Officer) |
#
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, this Report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the date indicated above.
/s/ Luke E. Fichthorn III
Luke E. Fichthorn III
Chairman and CEO
/s/ Gerald L. DeGood
Gerald L. DeGood
Director, Chairman of the Audit Committee
/s/ Charles T. Foley
Charles T. Foley
Director
/s/ James A. Wolf
James A. Wolf
Director
/s/ William F. Yelverton
William F. Yelverton
Director
/s/ Kenneth L. Bayne
Kenneth L. Bayne
Vice President Finance
(Chief Financial Officer)
/s/ Lawrence C. Maingot
Lawrence C. Maingot
Corporate Controller
(Chief Accounting Officer)
#
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, DC 20549
EXHIBITS
TO
FORM 10-K
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended December 31, 2005
Commission File No.: 1-8120
BAIRNCO CORPORATION
(Exact name of registrant as specified in the charter)
Description | Incorporated Herein by Reference To |
Certificate of Incorporation, as amended through September 24, 1991. | Exhibit 3 to Bairnco's Annual Report on Form 10-K for fiscal year ended December 31, 1991. |
By Laws, as amended through December 18, 1991. | Exhibit 3 to Bairnco's Annual Report on Form 10-K for fiscal year ended December 31, 1991. |
Agreement of the Corporation, dated March 30, 1987, to furnish a copy of any instrument with respect to certain other long-term debt to the Securities and Exchange Commission upon its request. | Exhibit 4(e) to Bairnco's Annual Report on Form 10-K for fiscal year ended December 31, 1986. |
Bairnco Corporation 401(k) Savings Plan and Trust. | Exhibit 4.3 to Bairnco's Registration Statement on Form S-8, No. 33-41313. |
Bairnco Corporation 2000 Stock Incentive Plan. | Exhibit A to Bairnco's Proxy Statement for the fiscal year ended December 31, 1999. |
Bairnco Corporation Management Incentive Compensation Plan. | Exhibit 10 to Bairnco's Annual Report on Form 10-K for fiscal year ended December 31, 1981. |
Employment Agreement dated January 22, 1990, between Bairnco Corporation and Luke E. Fichthorn III. | Exhibit 10 to Bairnco's Annual Report on Form 10-K for fiscal year ended December 31, 1989. |
Third Amended and Restated Credit Agreement dated as of May 20, 2005, by and among Bairnco Corporation and certain of its subsidiaries and Bank of America, N.A., as Administrative Agent, and Wachovia Bank, N.A. | Exhibit 99.1 to Bairnco’s Current Report on Form 8-K dated June 2, 2005. |
Exhibits to Third Amended and Restated Credit Agreement dated as of May 20, 2005, by and among Bairnco Corporation and certain of its subsidiaries and Bank of America, N.A., as Administrative Agent, and Wachovia Bank, N.A. | Exhibits 99.2 through 99.4 to Bairnco’s Current Report on Form 8-K dated June 2, 2005. |
First Amendment, dated September 28, 2005, to Third Amended and Restated Credit Agreement dated as of May 20, 2005, by and among Bairnco Corporation and certain of its subsidiaries and Bank of America N.A., as Administrative Agent, and Wachovia Bank N.A. | Exhibit 99 to Bairnco’s Quarterly Report on Form 10-Q for the fiscal quarter ended October 1, 2005 |
#
Description | Incorporated Herein by Reference To |
Lease, dated May 17, 1999, between Crescent Resources, Inc. a South Carolina Corporation, and Bairnco Corporation. | Exhibit 10.1 to Bairnco's Annual Report on Form 10-K for fiscal year ended December 31, 1999. |
Lease, dated February 16, 2000, between Signtech USA, Ltd., a Texas Limited Partnership, and Arlon Signtech Ltd. | Exhibit 10.2 to Bairnco's Annual Report on Form 10-K for fiscal year ended December 31, 1999. |
Standard Industrial Lease dated May 1, 2002 between James E. and Nancy S. Welsh, trustees under Welsh Family Trust, dated April 20, 1979 and Arlon, Inc. | Exhibit 99 to Bairnco's Quarterly Report on Form 10-Q for the fiscal quarter ended June 29, 2002. |
Ernst & Young Preferability Letter Dated January 30, 2003 Re: Change in Actuarial Valuation Measurement Date for Pension Plans. | Exhibit 18 to Bairnco’s Form 10-K for the fiscal year ended December 31, 2002 |
Commercial/Industrial Lease dated December 18, 2002 between The Ben-Tal Family Trust and Arlon-Viscor LTD., a Texas limited partnership. | Exhibit 99 to Bairnco’s Form 10-K for the fiscal year ended December 31, 2002 |
First Lease Renewal Agreement, dated February 15, 2003, between Arlon Signtech Ltd, a Texas limited partnership and RAM Global, Ltd., a Texas limited partnership. | Exhibit 99 to Bairnco’s Form 10-K for the fiscal year ended December 31, 2003. |
2005 Annual Report to Stockholders. | Exhibit 13 filed herewith. |
Subsidiaries of the Registrant. | Exhibit 21 filed herewith. |
Consent of Independent Registered Public Accounting Firm. | Exhibit 23.1 filed herewith. |
Consent of Independent Registered Certified Public Accounting Firm. | Exhibit 23.2 filed herewith. |
Certification of Chief Executive Officer pursuant to Rule 13a-14(a) and Rule 15d-14(a), promulgated under the Securities Exchange Act of 1934, as amended. | Exhibit 31.1 filed herewith. |
Certification of Chief Financial Officer pursuant to Rule 13a-14(a) and Rule 15d-14(a), promulgated under the Securities Exchange Act of 1934, as amended. | Exhibit 31.2 filed herewith |
Certification pursuant to U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002. | Exhibit 32.1 filed herewith. |
#
Description | Incorporated Herein by Reference To |
Certification pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
Exhibit 32.2 filed herewith. | |
Report of Independent Registered Public Accounting Firm. | Exhibit 99.1 filed herewith. |
First Amendment, dated May 23, 2005, to Standard Industrial Lease dated May 1, 2002 between James E. and Nancy S. Welsh, trustees under Welsh Family Trust, dated April 20, 1979 and Arlon, Inc. | Exhibit 99.2 filed herewith. |
#